Chris Braun Posted January 12, 2016 Report Posted January 12, 2016 Just looking for any improvements I could make. The enclosure will be in a 2015 Subaru crosstrek powered by a nendo encore 4.5k. I realize the port area is a bit low but not sure which to sacrifice between that or air space. Thinking the 1.3 cu ft would be ok for that 10? Honestly it's bass preference. You seem to like the lows so I'm thinking 1.3 might be too small in general. Someone would have to throw it in boxpro or something to get some graph's. Just in my experience, a 1.4 to 1.5 for ported is almost minimal for a higher powered 10.
Joe X Posted January 12, 2016 Report Posted January 12, 2016 If you can't do anything but subs/port up here's a suggestion, a bit taller but it manages above 70 sqin of port area and 4.2 net. (power to subs rated):
NorthSPL Posted January 13, 2016 Author Report Posted January 13, 2016 Couldn't thank you enough! Greatly appreciated
Recommended Posts
Archived
This topic is now archived and is closed to further replies.