Jduncan15 Posted January 21, 2016 Report Posted January 21, 2016 I have a "bass gain control knob" installed in my system, it also serves as my outline converter (having my Rca connections) and I cannot seem to get a straight answer on what to set the knob to in order to set my gain properly on my amp without damaging anything. Any insight would be greatly appreciated
reedal Posted January 22, 2016 Report Posted January 22, 2016 Turn the knob all the way up (clockwise) before adjusting the amplifier gain. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Jduncan15 Posted January 22, 2016 Author Report Posted January 22, 2016 Okay thank you! Any explanation as to why?
reedal Posted January 22, 2016 Report Posted January 22, 2016 if you set the gain with the knob down, then use the knob to turn it up, you're going to clip the signal a lot. A lot a lot. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Jduncan15 Posted January 22, 2016 Author Report Posted January 22, 2016 That explains a lot thank you so much I couldn't be happier to get this resolved
Recommended Posts
Archived
This topic is now archived and is closed to further replies.