Jeff4661 Posted February 18, 2016 Report Posted February 18, 2016 I've been trying to find information on what they changed between the Ampere Audio 8.0 and the new ampere 9.0 Also has anyone clamped the new ampere 9.0? Current build 05 Yukon SLT http://www.stevemeadedesigns.com/board/topic/195350-jeffs-05-yukong-wall-build/
RainStryke Posted February 18, 2016 Report Posted February 18, 2016 The PCB layout is different and a few of the hook-ups are different. 8K http://amperecaraudio.com/wp-content/uploads/2015/04/AA-8.0-TFE-manual_141121.pdf 9K http://amperecaraudio.com/wp-content/uploads/2016/02/AA-9.0-TFHE-manual.pdf
Jeff4661 Posted February 18, 2016 Author Report Posted February 18, 2016 The PCB layout is different and a few of the hook-ups are different. 8K http://amperecaraudio.com/wp-content/uploads/2015/04/AA-8.0-TFE-manual_141121.pdf 9K http://amperecaraudio.com/wp-content/uploads/2016/02/AA-9.0-TFHE-manual.pdf Thank you I wasn't getting any answers from other places I've asked Current build 05 Yukon SLT http://www.stevemeadedesigns.com/board/topic/195350-jeffs-05-yukong-wall-build/
magillaru Posted February 18, 2016 Report Posted February 18, 2016 The 9.0 manual says 8k at 1ohm. From my understanding, you should easily get 9-10k at 12v with all other things being equal. The 9.0 was also clamped at 16k (I'm assuming this was at higher voltage (above 12) and I can't remember what the nominal load was.....maybe .25.....it's in a thread on here somewhere). Singer Alternators Team Asshole #anothershittysingerbuild
Recommended Posts
Archived
This topic is now archived and is closed to further replies.