CBEtsinger Posted December 9, 2018 Report Share Posted December 9, 2018 Box will be behind my driver seat with the rear seat folded up. I have measured it out to 33" x 21"x24" (WxHxD) I added pictures to help illustrate the space. I can adjust the box to fit between the seats higher but the depth will need to get lower as it gets higher. I listen to pretty much everything not much playing lower than 34hz, but I will put on a bass boosted song or pop a decaf here and there.. i'll be giving these 1500 watts each. I have 2 sheets of 3/4" x 4' x 8' Birch on hand. I may or may not Kerf the port, haven't made one like that just yet. For shits and giggles. could you also make a box for 4 Level 4 15's. I may just upgrade a few things to make that work if its not too difficult to build. Link to comment Share on other sites More sharing options...
Joe X Posted December 11, 2018 Report Share Posted December 11, 2018 So here is a suggestion, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 4 3/4", figure is just an assembly guide: NOTE: notice the port brace in the figure below. Link to comment Share on other sites More sharing options...
CBEtsinger Posted December 22, 2018 Author Report Share Posted December 22, 2018 Looks cherreh. ill be starting on it this weekend. Aloha Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.