BigChief247 Posted October 4, 2019 Report Posted October 4, 2019 I just received my AMM1 and would like to know how to properly use the true power mode. I have 2 subs hooked to a monoblock amp...do I need to just run 1 wire from 1 sub through the middle of the AMM1 or 1 wire from both subs? I tried running 1 wire from 1 sub and got a reading of around 700 watts using a 50HZ test tone, but I'm not sure if that's 700 watts per sub or 700 watts total that the amp is putting out at that frequency. I also tried that same method with music playing and it peaked out around 850 watts. The amp is a Rockford T1500 wired to 1 ohm, so I'm assuming that reading is per sub, just wanted to make sure. Quote
Jessica Posted October 4, 2019 Report Posted October 4, 2019 you mean the real time power mode? Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
Jessica Posted October 4, 2019 Report Posted October 4, 2019 did you read the manual? Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
BigChief247 Posted October 4, 2019 Author Report Posted October 4, 2019 Yes I read the manual, but it's not very thorough. It states to only use one wire (as in either the positive or the negative), but it's unclear to me if I should run both positive wires through it or just 1 positive wire through it. Quote
mothra Posted October 4, 2019 Report Posted October 4, 2019 just one. Quote if nothing changes, nothing changes You don't know what you don't know, till you don't know
Hotbutta Posted February 8, 2020 Report Posted February 8, 2020 On 10/3/2019 at 10:37 PM, mothra said: just one. I know it is late, but this info is not correct. He needs to run both positive or both negative wires through the AMM1. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.