1point21gigawatts Posted August 14, 2020 Report Share Posted August 14, 2020 Are you sure that front section is only 8.5 cubic feet? What are measurements of the outside of that front sections depth to the middle of the double baffle? So I can calculate the front section’s volume. Not saying anything bad or that you are wrong or anything like that. I just want to double check. And are the subwoofer magnets gonna be in the front ported section or the rear sealed section? And is there any bracing? “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
1point21gigawatts Posted August 14, 2020 Report Share Posted August 14, 2020 I need to know these things so I can asses and figure before I calculate a port area on that enclosure. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
Jonathan91v8 Posted August 14, 2020 Author Report Share Posted August 14, 2020 Link to comment Share on other sites More sharing options...
Jonathan91v8 Posted August 14, 2020 Author Report Share Posted August 14, 2020 Ok ill add pics so you can see Link to comment Share on other sites More sharing options...
Jonathan91v8 Posted August 14, 2020 Author Report Share Posted August 14, 2020 Inside measurements are 48.5 wide 17.5 tall and 18 deep on ported side. There is a double baffle where the subs are on. On the sealed side its 48.5 wide 17.5 tall and 6 deep Link to comment Share on other sites More sharing options...
Jonathan91v8 Posted August 14, 2020 Author Report Share Posted August 14, 2020 1 inch poles Link to comment Share on other sites More sharing options...
1point21gigawatts Posted August 14, 2020 Report Share Posted August 14, 2020 That’s nice. Let me do some calculations. Hold up. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
1point21gigawatts Posted August 14, 2020 Report Share Posted August 14, 2020 Net volume of the ported section is 8.405250115740741 cubic feet. “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
1point21gigawatts Posted August 14, 2020 Report Share Posted August 14, 2020 Optimal port measurements. inside width-12” outside width-13.5” inside height-12” outside height-13.5” Port length-12.75” (0.75” front board measurement is included in the port length measurement if you are making the port external. Measuring the length inside the port is the correct way to measure) tuning-45.14hz 144sq” of port area 17.13sq” of port area per cubic foot “How can we help you?” “And don’t forget to tell them that the customer isn’t always right.” Link to comment Share on other sites More sharing options...
Jonathan91v8 Posted August 14, 2020 Author Report Share Posted August 14, 2020 Ok. My question is if i make the 12x12 and 12 deep square port hole would that change my box net volume? I plugged my numbers in and it changed everything i got 20 inch of port area. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.