mel80 Posted July 31, 2023 Report Share Posted July 31, 2023 finally got started on it heres some pics form today tipping out the trunk build and starting to mock panels up front baffle will be tripple thick with dbl layer everywere else inner panels are a lil bit cheaper ply with the outer layers being 13 ply layout is going to be 3 subs across the top , and 2 on the bottoms on left and right of the baffle with a 225sqin swapable slot port tuned for 28hz for daily use and more then likley 45hz for burping 1 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 1, 2023 Author Report Share Posted August 1, 2023 1 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 1, 2023 Author Report Share Posted August 1, 2023 1 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 1, 2023 Author Report Share Posted August 1, 2023 2 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 7, 2023 Author Report Share Posted August 7, 2023 getting the inner shell done tonight 2 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 7, 2023 Author Report Share Posted August 7, 2023 got the excess cut fromt he corners and had to call it a night ran out of daylight , i have 2 panels to install in the top of the box tommorow morning and then i can work on fiberglassing and sealing the inside before i put the outser layers on 1 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 8, 2023 Author Report Share Posted August 8, 2023 closer , waiting ont he first 2 baffle layers to dry and then i can glue this one to those and install it for real 2 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 10, 2023 Author Report Share Posted August 10, 2023 hoping to get the port installed and all 7 amps wired up tommorow morning Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 11, 2023 Author Report Share Posted August 11, 2023 progress is slow but i got the port cut and in today for testing and 3 out of the 5 sub amps installed its enough for some low power testing /checking making sure the enclosure doesnt have anything loose etc hopefully ill have enough time this weekend to get all 5 wired up and playing 3 Quote Link to comment Share on other sites More sharing options...
mel80 Posted August 13, 2023 Author Report Share Posted August 13, 2023 just did all my volume calcs now that installed all my corner 45's and bracing with all my displacements this puts my wall at 13.1cft net which puts me right at 2.62cft per driver close enough for me i was aiming for 2.6 -2.7cft Quote Link to comment Share on other sites More sharing options...
.thumb.png.f735f4bf293030b5aad4d67e65a35e67.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.