barros57 Posted January 11, 2010 Report Posted January 11, 2010 lol, just got done flipping through 22 pgs. It looks sick! love the dual alt bracket. Ive got Hid's on my 93 chev. I was thinking of doing the 4 hi mod also. You should get som hid's for the hi beams and make it crazy bright haha My 93 chevy truck Orion HCCA 15's Build 6K HID's 2 orion HCCA 15.4 2 AP30001D's 2 optima yellowtops, 2 C&D 270fr's, all 3 tsunami 1/0, CS144 190 amp Rockford p200-2 Rockford p200-2 Rockford p300-1 Kole KX1 5500D -broken
95_1500 Posted January 11, 2010 Author Report Posted January 11, 2010 Hey i have a 1994 full size blazer the engine looks like yours, my question was how much will u charge me to make me a duel bracket for my truck i think is the same engine and my alt is in the same place is your ill be waiting for u thank u.Help Me Please Yeah as long as its a 350 which full size blazer should be then its the same. It wouldnt cost a lot to do the only thing is i just moved back into the dorm and classes start tomorrow.. I wont have any time to do it. If youre really set on it then PM me and sometime when im at home I might be able to redraw the templates one day and ship them to you.. Your best bet would be to just get one from Iraggi, DC Power or Mechman.. Like I said if youre set on this one send me a PM Well got them both painted today and im pretty happy with the results. Driver side after paint Passenger during painting Didnt have time to get them in, just going to let them cure in my dads workshop room that has a heater running 24/7 until I go back home Trying to show the texture.. Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted January 11, 2010 Author Report Posted January 11, 2010 lol, just got done flipping through 22 pgs. It looks sick! love the dual alt bracket. Ive got Hid's on my 93 chev. I was thinking of doing the 4 hi mod also. You should get som hid's for the hi beams and make it crazy bright haha Thanks man Yeah im replacing the hi beams with 35w 6000 or 8000k eventually Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
barros57 Posted January 11, 2010 Report Posted January 11, 2010 so for the 4 hi mod you connected pin 87 (silver wire) to the stock orange wire low beams pin 86 (blue wire) to the stock green wire hi beams pin 30 to batt + pin 85 to ground So then when the hi beams turn on, the power tripps the relay and supplys power from pin 30 to pin 87 thus turning on the low beams? Im doing this tomorrow My 93 chevy truck Orion HCCA 15's Build 6K HID's 2 orion HCCA 15.4 2 AP30001D's 2 optima yellowtops, 2 C&D 270fr's, all 3 tsunami 1/0, CS144 190 amp Rockford p200-2 Rockford p200-2 Rockford p300-1 Kole KX1 5500D -broken
95_1500 Posted January 11, 2010 Author Report Posted January 11, 2010 so for the 4 hi mod you connected pin 87 (silver wire) to the stock orange wire low beams pin 86 (blue wire) to the stock green wire hi beams pin 30 to batt + pin 85 to ground So then when the hi beams turn on, the power tripps the relay and supplys power from pin 30 to pin 87 thus turning on the low beams? Im doing this tomorrow Yup it works with all 88-98 full size chevy/gmc vehicles.. Do it mayne, only takes about an hour tops after you get the relay and wiring ready to go in, and thats if you have to remove the grill like I did.. And if anyone is wondering if the low beam HIDs have to "recharge" when you flip the highs on they dont since they are charged from the inital turn on of the lights Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
barros57 Posted January 11, 2010 Report Posted January 11, 2010 thats sick dude. Yea, definatly throw some hid's in there for the hi beams. for my truck i got one of those cheap 35w kits on ebay. They've treated me well so far, but ive heard they can be unreliable.. Anyways, A pillars are lookin good! I think you should put like 3 more 6.5's on each side in the rear b pillars where the 2 stock 4X6" are. My 93 chevy truck Orion HCCA 15's Build 6K HID's 2 orion HCCA 15.4 2 AP30001D's 2 optima yellowtops, 2 C&D 270fr's, all 3 tsunami 1/0, CS144 190 amp Rockford p200-2 Rockford p200-2 Rockford p300-1 Kole KX1 5500D -broken
95_1500 Posted January 11, 2010 Author Report Posted January 11, 2010 thats sick dude. Yea, definatly throw some hid's in there for the hi beams. for my truck i got one of those cheap 35w kits on ebay. They've treated me well so far, but ive heard they can be unreliable..Anyways, A pillars are lookin good! I think you should put like 3 more 6.5's on each side in the rear b pillars where the 2 stock 4X6" are. Hahaha ive had ideas for those panels for a while... We'll see, I have a lot of debt with my dad for summer classes that he just told me today I have to start paying back so upgrades and additions will be put on the backburner for quite a while.. Oh well Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
thehoe92 Posted January 11, 2010 Report Posted January 11, 2010 can't believe I over looked this build the last 2 pages look good I'm going to read the whole thing tonight! oh and vinyl stretches A LOT more than anything I've worked with so far.. maybe its just the type you got but a-pillars are lookin titties man Wouldnt be thehoe92 without teh purple
Red-navi-916 Posted January 11, 2010 Report Posted January 11, 2010 can't believe I over looked this build the last 2 pages look good I'm going to read the whole thing tonight!oh and vinyl stretches A LOT more than anything I've worked with so far.. maybe its just the type you got but a-pillars are lookin titties man what do u know about titties? j/k damn man build is looking good no doubt i like the blowthrough/wall not sure if i ever posted in here but i been keepin up with this log..keep it up BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass.
95_1500 Posted January 11, 2010 Author Report Posted January 11, 2010 can't believe I over looked this build the last 2 pages look good I'm going to read the whole thing tonight!oh and vinyl stretches A LOT more than anything I've worked with so far.. maybe its just the type you got but a-pillars are lookin titties man Thanks man.. Its all my old system up until like page 8 or 9? Dont remember The vinyl i had was actually naugahyde shit. I found some stretchy vinyl from my website i order from im considering using on some stuff I like all the wrapping you did on your interior, looks great what do u know about titties? j/kdamn man build is looking good no doubt i like the blowthrough/wall not sure if i ever posted in here but i been keepin up with this log..keep it up Thanks mayne Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
Recommended Posts
Archived
This topic is now archived and is closed to further replies.