Jump to content

Not so regular cab Chevy - Back in business


Recommended Posts

Posted

ive molded my epic in that spot.

or im working on it anyways

I meant to ask if you had any pics or could take some of it but got distracted the other day. Looked for a build log and didnt see one

The problem with molding it in is if the controller ever dies and I have to replace it I gotta cut it out and remold the new one in. Been comin up with a few ways to mold it where its got a box around it that the filler goes up to that so the controller isnt actually bonded to it. Some 1/4" mdf with the edges rounded then filled up to there. Wont look as good as flush but it will definitely look better than it currently does and make it easier to see, right now I have to look around the shifter whenever its in gear lmao

Edit: page 27 finally :D

Posted

damn im jealous about the wire, i need some more of it and 250 would be perfect, all i can find now is this solid black crap

Yeah I saw that when I checked ebay a little while ago..

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=250590283979&Category=1498&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2

If you really wanna mess with a bunch of 15' sections... Check your PMs in a second ;)

Posted

holy jeebus. Just went through all 27 pages and read damn near every post. And honestly. Im kinda sad Im at the end now :(. Guess Ill go outside and work on my truck now!

Team DC!

2005 F150 | Pioneer | Infinity Kappa 6x8's | MTX 3404 4 Channel | Q Logic Kicks | KNU | DC | AQ |

1998 Taurus | Alpine | Punch 5x7's | Rockford Fosgate | MTX | KNU |

Posted

holy jeebus. Just went through all 27 pages and read damn near every post. And honestly. Im kinda sad Im at the end now :(. Guess Ill go outside and work on my truck now!

Haha appreciate the time to check it all out.. Dont worry this thread just like every other one on this forum will never end. Its too addicting ;)

Ill have more pics tonight, mostly wiring and shit but I cant really do much with the mdf because mother nature likes pissing me off

DSCN2290.jpg

Would cut it all in the garage but then dad bitches about mdf dust all over his stuff..Plus i washed the truck yesterday for the first time in honestly about 10 months and it currently lives in the garage

Posted

Got all of the speaker, remote and rca wires taped down where they need to be. Was in the process so some wires arent taped down yet in these 2 pics, forgot to take one of it finished. Practically half a roll of duct tape there and its ugly as hell but it does the job..

DSCN2292.jpg

DSCN2293.jpg

I have to prop up the back of my console with a 2x4 to attach the wires to the 50.4 because without it propped up this is how much room i have

DSCN2295.jpg

Ran the wire for the 12v buss bars, this was from the first 1/0 kit i had ever bought. I had it stashed away so I decided to go ahead and use it since ill only be pulling around 125 amps between the 100.4, 50.4, leds etc.

DSCN2296.jpg

Just to show how sad of an excuse for 1/0 this really is, knu kolossus fleks 1/0 is a tight fit in these lugs compared to this.... Its also the least flexible wire I have yet to come across..

DSCN2297.jpg

DSCN2299.jpg

DSCN2302.jpg

DSCN2304.jpg

DSCN2307.jpg

DSCN2310.jpg

DSCN2312.jpg

DSCN2313.jpg

Its supposed to rain again all day tomorrow so I didn't bother rushing tonight, ill run the knu on the driver side tomorrow. Taking off work Friday so i can get started on building the rack first thing in the morning and get it all put in and back together.

Posted

when you get this done Im going to have to make my way back down there sometimes to hear it

Well I only have another 2 months of school left, may 7th or so is the last day of the semester so we can meet up sometime shortly after. We'll find a halfway point so you dont have to come all the way down here.

I talked to Nathan again today and im gonna try to get my D1600s pre-ordered for the April 23rd shipment so hopefully she might be loud by then :D. Been wantin to hear the blazer since you got it finished, looks nice and loud :)

Posted

Still at work just got back from the machine shop, got my buss bars cut so I can drill and tap em tonight. Im considering keeping the angled piece the bars will mount to separate from the amp rack. If I have to remove the rack I dont want it to be harder than it needs to be, 8 less connections I have to take loose if I make them separate.

Posted

Got home late from work today and had about 50 interruptions, took way longer than it should have but at least im ready to build the amp rack when i wake up

What you know about usin a drill press on the tailgate? :D

DSCN2324.jpg

DSCN2315.jpg

DSCN2316.jpg

DSCN2318.jpg

DSCN2319.jpg

DSCN2320.jpg

DSCN2330.jpg

DSCN2331.jpg

Mounting this fuse was a major bitch, took at least 30 minutes of balancing on the fan shroud just to get the screws in. At least I know my alt bracket is strong, it held me leaning on it the whole time

DSCN2334.jpg

DSCN2336.jpg

DSCN2337.jpg

Not going to reconnect the alts until I get the 3100 back in tomorrow, just had the nuts on loose to hold the wires in place for now

DSCN2338.jpg

DSCN2339.jpg

DSCN2342.jpg

DSCN2340.jpg

DSCN2344.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...