95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 i wanna move my swithes but i dont know what to put were the blanks spot is on the door side note like the build Thanks man.. The tweeters currently in my pillars plus another set will be in my doors in that spot, putting AA tweets in the pillars once I do that.. Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
killallblue Posted May 27, 2010 Report Posted May 27, 2010 Never thought about twets there might try that in my blazer
qu1cks1lver56 Posted May 27, 2010 Report Posted May 27, 2010 damn man, sick vette. and as always, your build is lookin great. you def. have some patience when it comes to wiring. First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load.
95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 Yeah hoping i can get them aimed well enough so theyre not shooting right into the drivers/passengers ears. Those morels get pretty harsh right now lol Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 damn man, sick vette. and as always, your build is lookin great. you def. have some patience when it comes to wiring. Thanks man.. I enjoy wiring and soldering, the only reason I have patience with it haha. It will take a good 4 hours id assume to get all of the extending done. Who knows when the next time ill get a good amount of time to work on it. On second thought I just remembered im not going into work Monday morning and my night job is closed Mondays so I guess ill knock most of it out then.. Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted May 27, 2010 Report Posted May 27, 2010 nope...been trying to get some cash together for the 8's I found from polk audio. then I will be glassing the hell out of the doors. I have everything else, so ready for them, but the last minute find is holding me up for now. been running back and forth to work with my subs hooked up to my mids/highs amps for now, and for 1360 watts, they tease me quite a bit.....cant wait to get the wire and batteries to get the other 5200 watts going!!! this build is sick bro. just ran through it again with my wife. for not having interest in our basshead shit, she sure as hell liked some of the stuff you have been pulling out your sleeve! :clapping: 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 nope...been trying to get some cash together for the 8's I found from polk audio. then I will be glassing the hell out of the doors. I have everything else, so ready for them, but the last minute find is holding me up for now. been running back and forth to work with my subs hooked up to my mids/highs amps for now, and for 1360 watts, they tease me quite a bit.....cant wait to get the wire and batteries to get the other 5200 watts going!!! this build is sick bro. just ran through it again with my wife. for not having interest in our basshead shit, she sure as hell liked some of the stuff you have been pulling out your sleeve! :clapping: Yeah man that'll be sick for sure! Better get that build log started lmao You mean to tell you guys have nothing better to do than go through my build at like 3-4 in the morning? Whats that say about you? Get outside mayne, thats wasted valuable truck time lmao Thanks, both of you Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted May 29, 2010 Author Report Posted May 29, 2010 Didnt get much done this morning but the console is ready to have fleece stretched then the glassing begins Gotta be at work in 11 minutes lmao Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted May 31, 2010 Author Report Posted May 31, 2010 Picked up some fleece this morning and finally got time to wrap it And you know what comes next... Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 1, 2010 Author Report Posted June 1, 2010 No love for the new console? Or hate even for that matter lmao Passenger door controls have been extended and still work Wires cut to length, twisted and taped It was a little unnerving when I went to cut it, got over that quick though Got a little dark, camera didnt want to focus, wires soldered at the door Soldered at the plugs This was the easy door, 10 wires. Hoping to knock out the driver door Wednesday since I have the night off, 19 wires in that one Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
Recommended Posts
Archived
This topic is now archived and is closed to further replies.