95_1500 Posted June 8, 2010 Author Report Posted June 8, 2010 Busy day at work, didn't get a chance to make the new idler spacer but tomorrow looks promising.. Pulled off the driver panel and all of the plastic Finished soldering the wires and it all still works Still have my 50.4 and the 100.4 is in the garage... But this afternoon my 3000D disappeared in a box on a brown truck As far as I got stripping the interior to get ready for deadening, the easy part is over, the wiring under the carpet is what im not looking forward to Deadener will be here tomorrow and idler bearings should be here tomorrow or Wednesday. Hope to get the floor deadened and the carpet back in Wednesday night. Will probably get around to doing the back wall, doors and roof this weekend when I have some more time off work Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 8, 2010 Author Report Posted June 8, 2010 Didnt have a lot of time today either but got the spacer done Some lathe action Have to work in an hour and havent left work yet lmao. according to UPS my damplifier is at my front door. Pics of that later Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 8, 2010 Author Report Posted June 8, 2010 Thanks Ant! Ill get some shit done tomorrow Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 10, 2010 Author Report Posted June 10, 2010 Look at that mess Much Better Was some pinhead sized surface rust spots in the driver floorboard, probably from back in the day when I used to go offroading and hop in with soaked shoes. Sanded it all down and sprayed some primer. Being my first time ever using any form of deadener it took a while to get the hang of it. Only used 12 sheets to do this, I can finish off the floor with 2 more sheets and still have 26 more for the back wall, doors and roof. Im going to attempt to bust ass tomorrow at work and take off Friday morning to finish up the floor and start putting the wires and interior back in. Hoping my bearings show up so I can install the new idler to measure and find a new belt and get the truck mobile again. Word on the street is the replacement for my disappearing 3000D should be here soon Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
qu1cks1lver56 Posted June 10, 2010 Report Posted June 10, 2010 Lookin good man. First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load.
95_1500 Posted June 10, 2010 Author Report Posted June 10, 2010 Lookin good man. Thanks bro Looks good !! Glad to know I have the "DJ sound deadening seal of approval" lmao Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 10, 2010 Author Report Posted June 10, 2010 Oh snap Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted June 11, 2010 Author Report Posted June 11, 2010 All I have to say is Jacob, DJ, and Sundown Audio for the god damn mother fucking win... NEVER have I been treated better by any company, Ive been running Sundown only a little over 2 years and Ill be damned if I switch within the next 20. That is all Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
Recommended Posts
Archived
This topic is now archived and is closed to further replies.