Jump to content

My Plan: Check This For Me


Recommended Posts

Okay - for my new build - David is building me the box (picking it up Saturday) and one 15" DC Level 4

Getting a Sundown 1000D this Wed, sub this weekend or next Wednesday.

I've got that figured out - just need some help with the wiring.

Thinking of running 1/0 to be safe from battery under the hood (250 A fuse?)

to the back, to a distro block, then some 4 gauge to teh Sundown amp.

mids highis will be a 100.2 or .4 not sure yet, i'll run 8 guage to that from the distro block (distro has 4 gauge out - how would i reduce this?)

I want a voltage meter somewhere in the system - where should this go? I want to know what both amps are running at

As far as electrical, was thinking a nice new battery under hood and no change to the alt - maybe the big 3 and call it a day?

car is in sig

Hmm can't think of any other questions now, look for a build thread in the next week or 2!

Thanks all

Edited by Bass4Lyfe

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

1/0 for big 3 and a new batt under the hood then 1/0 to the rear with 4 gauge to the mid/high amp.

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

i highly doubt you will need a 250 amp fuse. why dont you just use what sundown reccomends?

MMM BASS OATS..ITS WHAT I HAVE FOR BREAKFAST

2 AudioQue HDC3 18'' subs

Rockford Fosgate T1 6.5 mids

MMATS 2000.05

XS Power D1200

Knukonceptz 1/0

Pioneer Premier DEH-P490iB

" Shit I can roll a blunt better than those bitches in Havana!"- Uncle Elroy

Link to comment
Share on other sites

yup isn't that what i put? *double checks* yeah sounds good - wait why 4 gauge for mids highs?

also for speaker wire - the subs want like 10 gauge - maybe 8 to be safe?

thanks

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

i'm going to be running 2 amps so it might not be that simple - total of about 1500 watts RMS - call it 1100 for the 1000D, and 4-500 for the 100.4

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

looked for awhile can't seem to find it hmmmm lemme keep trying

thx david

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

m_f296ef7afc9fb6935e71ade3eacb56ef.jpg

m_4bc345c7fc82f67a5ffca91c8c0645d7.jpg

m_7fceef2eef245062d3802e4c6c6968b6.jpg

m_bdd04d5ff2712ab1a6a73c5f6adedcb0.jpg

m_a98e119303cf0a2d3f38595e432760e6.jpg

there are more pics in my myspace page under photo's

all corners got meades resin trick, soon as the areo ports and carpet get here it will be done

link to my myspace is in my sig

Link to comment
Share on other sites

oh great will look at that after dinner. it's looking GREAT david awesome work!!! i'm excited!!

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 848 Guests (See full list)

×
×
  • Create New...