Box Type? Ported Wall Box Or Box In Trunk? Ect...

[twiztid8322]

I have a 97 civic 2 door Wondering if it would be louder in a wall ported box where my rear seats are, blocking off the backseat of the car behind me. Or making a ported box for the trunk?

Four 15" kicker cvr's at 2 ohm on a zx1500.1 amp with 0 guage wire and the big 3.

And whats the best hz to tune the box at? And what size box ? Im not so worried about SQ . Just the most bass for my buck.

Also the boxes will be 2 seperate ones with 2 speakers in each box. Should I also make a wall between each sub inside the box so they have there own seperate port?

*2 many questions but better knowing than not knowing*

[audiofanaticz]

Just make a single chamber wall in your back seat for all the subs.

Nothing else will be louder.

[twiztid8322]

Just make a single chamber wall in your back seat for all the subs.

Nothing else will be louder.

Cant make a single chamber box. Wood that high and wide wont fit thru the door.

[audiofanaticz]

Lol...

It will fit.

build it inside the car.

This cutout is for two 18's.

Its about 40 inches high and 60 inches wide and it went through the door.

[twiztid8322]

I measured and its not going to fit 4 15" . That cutout of 2 18" you did looks like it wasnt even difficult to fit it in those huge doors. Im doing a whole wall like from the top of the roof to the floor. Its impossible to fit and make a huge box inside a civic. Not impossible but its a bitch. And id rather do 2 seperate boxes, so whenever i sell the car I can take them in and out easy and sell them in the boxes to upgrade. Because we all know that we upgrade.

But building a walled box inside a civic is just a cramp waiting to kill.

I will be adding the puzzle peices of wood to block off every hole from the front seats to the rear. Just to seal the cab properly