tyyyyyleerr Posted August 6, 2008 Report Share Posted August 6, 2008 i recently wanted to take on a project with four btls but i work for minimum wage and space is a problem and im not tht experienced but im lookin for a challenge so im goin with four kicker l7's 15 inch subs i sold my previously owned boss amps got 600 for all 4 some of u know i drive a 2001 durango and the boxes im building will fit so not a problem and im thinkin bout runnin kicker amps but i dont know how my electrical will work out so any suggestions battery and alternator wise are needed and any other suggestions are welcome thanks Quote Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 6, 2008 Report Share Posted August 6, 2008 i recently wanted to take on a project with four btls but i work for minimum wage and space is a problem and im not tht experienced but im lookin for a challenge so im goin with four kicker l7's 15 inch subs i sold my previously owned boss amps got 600 for all 4 some of u know i drive a 2001 durango and the boxes im building will fit so not a problem and im thinkin bout runnin kicker amps but i dont know how my electrical will work out so any suggestions battery and alternator wise are needed and any other suggestions are welcome thanks if you wanted btls, stick with it. I work 7.50 hr doing dishes at a cracker barrel but i'm doing 24 15s and a little over 10,000 watts :S..lol just takes time. Quote Link to comment Share on other sites More sharing options...
tyyyyyleerr Posted August 6, 2008 Author Report Share Posted August 6, 2008 if you wanted btls, stick with it. I work 7.50 hr doing dishes at a cracker barrel but i'm doing 24 15s and a little over 10,000 watts :S..loljust takes time. i would love to stick with them but the box would be soo big i would have to get ride of my second and third row or wall off the car and i cant do tht at the moment cause im still paying on the car Quote Link to comment Share on other sites More sharing options...
1LoudCelica Posted August 6, 2008 Report Share Posted August 6, 2008 i would love to stick with them but the box would be soo big i would have to get ride of my second and third row or wall off the car and i cant do tht at the moment cause im still paying on the car oooo... while I was no help, mind you I was only trying to help .. lol L7s are great subs, you won't be disappointed. As for electrical, big 3, new alt try EA or iraggi.. and for batts, try dc sounds or kentiks. Quote Link to comment Share on other sites More sharing options...
tyyyyyleerr Posted August 6, 2008 Author Report Share Posted August 6, 2008 oooo... while I was no help, mind you I was only trying to help .. lolL7s are great subs, you won't be disappointed. As for electrical, big 3, new alt try EA or iraggi.. and for batts, try dc sounds or kentiks. any clue on how many batteries and alt amperage more then one alt ?? and i appreciate the any kind of help im lost in the wodds when it starts comin to electrical Quote Link to comment Share on other sites More sharing options...
wL<3bass Posted August 6, 2008 Report Share Posted August 6, 2008 (edited) Since I assume your your going to be running 4-5kwrms your gonna need atleast a 200amp alt and atleast one d3100 (I would get two b/c I don't like voltage drop) and a MLA module wouldn't hurt. edit: I would get a higher amperage alt if you can get one and you got the dough. Edited August 6, 2008 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
tyyyyyleerr Posted August 6, 2008 Author Report Share Posted August 6, 2008 Since I assume your your going to be running 4-5kwrms your gonna need atleast a 200amp alt and atleast one d3100 (I would get two b/c I don't like voltage drop) and a MLA module wouldn't hurt.edit: I would get a higher amperage alt if you can get one and you got the dough. yeah im gonna be runnin 4000 wats rms and this might be a dumb questions but is there any way to take a t4000.1 and divide the power to four subs i know its one channel just wonderin Quote Link to comment Share on other sites More sharing options...
Kapetol T Posted August 6, 2008 Report Share Posted August 6, 2008 yeah im gonna be runnin 4000 wats rms and this might be a dumb questions but is there any way to take a t4000.1 and divide the power to four subs i know its one channel just wonderin Yes, but make sure that you can wire it up and have the impedance correct. Do you have the subs yet? Quote Link to comment Share on other sites More sharing options...
wL<3bass Posted August 6, 2008 Report Share Posted August 6, 2008 yeah im gonna be runnin 4000 wats rms and this might be a dumb questions but is there any way to take a t4000.1 and divide the power to four subs i know its one channel just wonderin All four of the 15s need to be dual 2ohm voicecoils....Wire each sub in series and then parallel them together for a 1ohm load. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
tyyyyyleerr Posted August 6, 2008 Author Report Share Posted August 6, 2008 All four of the 15s need to be dual 2ohm voicecoils....Wire each sub in series and then parallel them together for a 1ohm load. i have two of them there the 06 model and 2 ohm and i have manuals and diagrams etc to show how to wire wire everything where can i get a hold of a mla module does anyone know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.