usmc7980 Posted August 26, 2008 Author Report Share Posted August 26, 2008 (edited) Just have one more ?, When I run the numbers for desired port length in the inputs between 18-23(grey area) the tuning changes(37Hz @18 inches and 34Hz @23 inches) but the wood length does not, so is there a way to know what your actually going to be tuned at? Edited August 26, 2008 by usmc7980 Quote Link to comment Share on other sites More sharing options...
andym85 Posted August 26, 2008 Report Share Posted August 26, 2008 yea, thats the whole issue....it has to do with the whole end correction thing and when the length of wood for L1 is at its max but no bend is made....confusing...not sure another thing...if you are putting the port(s) on top of the box, make sure you enter the height for the depth...b/c the port length is figured on the depth of the box...(and just enter the depth in the height field) Quote i likes me some audio stuff... Link to comment Share on other sites More sharing options...
usmc7980 Posted August 26, 2008 Author Report Share Posted August 26, 2008 (edited) no subs up port back like this, Ignore the writing in the port section, it changed since I drew it Edited August 26, 2008 by usmc7980 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.