mr_kebo Posted January 2, 2007 Report Posted January 2, 2007 Well i orginally was wanting someone here to design me a nice box that i would try to build but due to the lack of response i decided to do some reading up on all of this and such and after speaking with scott from FI we decided to do a 14cu ft with 230sqin of port for 2 18" BTLs. Thing is huge . http://forum.ecoustics.com/bbs/messages/4/308852.jpg http://forum.ecoustics.com/bbs/messages/4/308853.jpg http://forum.ecoustics.com/bbs/messages/4/308854.jpg http://forum.ecoustics.com/bbs/messages/4/308855.jpg Now that all that is done i get to use resin to 90 all the corners and use some steel all thread rods to brace it. Cant wait to have the cash to order my fully loaded 18" BTLs. There is 6" between the port and the back hatch is that gonna cause loading issues?
Ernesto Posted January 2, 2007 Report Posted January 2, 2007 Sounds like 2 to meYeah just saw he's doing 14cubes so sounds like two to me too.
Ernesto Posted January 2, 2007 Report Posted January 2, 2007 Yes 2 18" BTL fully loadedSounds good...You know what amps your getting already?
mr_kebo Posted January 2, 2007 Author Report Posted January 2, 2007 going to run 1 massive audio p3000.1 to each sub. Give it roughly 3kwrms per sub.
Dale Posted January 2, 2007 Report Posted January 2, 2007 What kind of alternator/batteries are you running?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.