bibby>Chode Posted April 19, 2010 Author Report Share Posted April 19, 2010 SD doesnt have any from my truck. I'll look around for some once i get my spindles and see where i'm at. Link to comment Share on other sites More sharing options...
killallblue Posted April 19, 2010 Report Share Posted April 19, 2010 U could always make ur own Link to comment Share on other sites More sharing options...
bibby>Chode Posted April 20, 2010 Author Report Share Posted April 20, 2010 I painted my notches today. Still needs another coat... Link to comment Share on other sites More sharing options...
Soulman07 Posted April 20, 2010 Report Share Posted April 20, 2010 I have DJM 2" spindles with 3" coils.. Since you can't use coils obviously.. DJM makes lowered control arms for the other 2" or 3" drop 2" lower control arm http://www.stylintrucks.com/part.aspx?category|category_root|-30=Suspension&category|cat_-30|373=Lowering+Parts&canned_results_trigger=&partfamilyid=3333&partid=12825 3" http://www.stylintrucks.com/part.aspx?category|category_root|-30=Suspension&category|cat_-30|373=Lowering+Parts&canned_results_trigger=&partfamilyid=3333&partid=12828 Looks nice though.. I yet to install my notch I am bringing a whole new meaning to bottoming out when I drive...lol I have about an inch worth of clearance between the axle and the frame at 5/8. Sick work though.. I've been waiting for you to get back to it! 1993 Chevrolet SWB Pickup Viper 791XV Primer Stage 5/8 Static Drop Kinetik HC1800 Big 3 Knu Flex 0 Team Tex Flex Link to comment Share on other sites More sharing options...
bibby>Chode Posted April 20, 2010 Author Report Share Posted April 20, 2010 Thanks, i bookmarked those. Between the 2" spindles & 2" lower control arms i should have my 4" and be able to lay out in the front. Link to comment Share on other sites More sharing options...
bibby>Chode Posted May 2, 2010 Author Report Share Posted May 2, 2010 I'm just here building hype for tomorrow. We should have it finished tomorrow afternoon. Look for pics of it laying frame tomorrow night. Link to comment Share on other sites More sharing options...
Soulman07 Posted May 2, 2010 Report Share Posted May 2, 2010 Still waiting..!! The exhaust y pipe was raised? I don't recall seeing it I think. I know it might have to be done though. 1993 Chevrolet SWB Pickup Viper 791XV Primer Stage 5/8 Static Drop Kinetik HC1800 Big 3 Knu Flex 0 Team Tex Flex Link to comment Share on other sites More sharing options...
Wastehog Posted May 3, 2010 Report Share Posted May 3, 2010 Bibs needs to upgrade PB now! I want MOAR pics! 1985 Chevy Silverado Black and Silver SBC 350/700r4 Link to comment Share on other sites More sharing options...
EpicenterDesigns Posted May 3, 2010 Report Share Posted May 3, 2010 Couple things......... Fix your photobucket. I can't see pics. Only pics I did see where some jagged cut spring pockets and tie rod notches up front. If you cleaned those up already....good work. Do not order lower contol arms. They probally won't help you at all. Get the 2" spindles first and set the thing on the ground and see what is holding you up. Y pipe probally will be if that hasn't been taken care of yet. Also may see that if you just notch the lower control arms, you will be good. Something easy you can do yourself in an afternoon. I can probally provide pics if you need them. Building The Best.....Repairing The Rest The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price! Link to comment Share on other sites More sharing options...
bibby>Chode Posted May 3, 2010 Author Report Share Posted May 3, 2010 I'll address all the comments later, we jsut got finished, and im fixing to take a bath then eat dinner. I'll post all the new pics in my other PB account tomorrow when i get off work and finish buttoning everything up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.