SPLGEO Posted January 4, 2007 Report Posted January 4, 2007 Sonic took the one amp back... and no after some talking they will take both back.... and I am left with nearly 500 sonic bucks to use. So new choices 1. http://www.sonicelectronix.com/item_4238.html Hifonics herc. wired at .35 ohms.... 2.http://www.sonicelectronix.com/item_5647.html Mtx TA81001 at .35 ohm 3. http://www.sonicelectronix.com/item_3660.html Alphasonik PMA12000da at either .35 ohm or 1.4 4.http://www.sonicelectronix.com/item_7151.html power acostic sl3400d at either .35 ohm or 1.4 5. http://www.sonicelectronix.com/item_5382.html# What i probley should of gotten. 6. anything else you guys suggest from sonicE Quote 1995 Geo Prism . FI BTL 12 P chamfer, 3rdmagnet HIXMAX COIL 1/0 big 3 HIFONICS COLOSSUS 1.7 cubs tuned to 60hz in the works 2xTruck battery 1125 cca.
AlpineTypeR06 Posted January 4, 2007 Report Posted January 4, 2007 I say save up and get the Colossus Quote 2003 Chevy Blazer 4drPioneer AVIC-D3Memphis 9 volt line driverRE Audio XXX compsPower Acoustik NB-4 tweeters (x4 on dash)Crescendo 1000c42 Alpine Type R 15s (2 more and new box coming soon) Hifonics XXII ColossusIraggi 300A AltKinetik Hc800 up front and 2 2400s in the backKicker Hyperflex 1/0 and 4 gaugeDDM Tuning H.I.Ds35w 10,000k in projector low beams55w 12,000k high beams
AI James Posted January 4, 2007 Report Posted January 4, 2007 Sonic took the one amp back... and no after some talking they will take both back.... and I am left with nearly 500 sonic bucks to use. So new choices 1. http://www.sonicelectronix.com/item_4238.html Hifonics herc. wired at .35 ohms.... not gonna like .35 at all 2.http://www.sonicelectronix.com/item_5647.html Mtx TA81001 at .35 ohm wont run under 1ohm 3. http://www.sonicelectronix.com/item_3660.html Alphasonik PMA12000da at either .35 ohm or 1.4 wont run at .35 so look at 1.4 4.http://www.sonicelectronix.com/item_7151.html power acostic sl3400d at either .35 ohm or 1.4 again not gonna work at .35 5. http://www.sonicelectronix.com/item_5382.html# What i probley should of gotten. 6. anything else you guys suggest from sonicE Quote
SPLGEO Posted January 4, 2007 Author Report Posted January 4, 2007 so it sounds like colossus at 1.4 ohms Quote 1995 Geo Prism . FI BTL 12 P chamfer, 3rdmagnet HIXMAX COIL 1/0 big 3 HIFONICS COLOSSUS 1.7 cubs tuned to 60hz in the works 2xTruck battery 1125 cca.
AI James Posted January 4, 2007 Report Posted January 4, 2007 my question is this, Whys everyone getting dual .7 coils, it just makes it a pain in the ass to find an amp. a colossus is rated at 1ohm times 2 or 2ohm, it may work out for you but i ran one of mine at 1ohm bridged and smoked it. Quote
SPLGEO Posted January 4, 2007 Author Report Posted January 4, 2007 i'll run it at 1.4 bridged... heck my alpines were 3.7 or 1.6 Quote 1995 Geo Prism . FI BTL 12 P chamfer, 3rdmagnet HIXMAX COIL 1/0 big 3 HIFONICS COLOSSUS 1.7 cubs tuned to 60hz in the works 2xTruck battery 1125 cca.
Coolwazabi Posted January 4, 2007 Report Posted January 4, 2007 i'd get the herc... knowing they are .35 ohm stable.. :weight_lift: Quote
AI James Posted January 4, 2007 Report Posted January 4, 2007 i'd get the herc... knowing they are .35 ohm stable.. :weight_lift: they are not, they will send a clipped signal, they work but you wont get a clean signal, ask lil kb Quote
AI James Posted January 4, 2007 Report Posted January 4, 2007 i'll run it at 1.4 bridged... heck my alpines were 3.7 or 1.6 if it fries be ready for the I told you so Quote
Coolwazabi Posted January 4, 2007 Report Posted January 4, 2007 i'd get the herc... knowing they are .35 ohm stable.. :weight_lift: they are not, they will send a clipped signal, they work but you wont get a clean signal, ask lil kb i thought he smoked his cause of him not setting the gains right... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.