tyyyyyleerr Posted September 22, 2008 Report Posted September 22, 2008 some of you might remeber my last blog i was installing 4 kicker l7s 15s well i had an amp laying around it pushes about 800 watts i hooked it up to one of the kickers and it seperated the cone from the coil it completly broke in half so i sold the remaining three not wanting to take the chance the kicker was in a 5 cubft box ported to about 35hz but anyway i have now ordered 1 18 inch fi btl fully loaded it will be here next week im going to hook it up to an audioque 2200d amplifier and a kinetik hc1400 battery or up all i need now is an altemator if necessary and if so wat amp alt would be best Quote
BigPimpin91 Posted September 22, 2008 Report Posted September 22, 2008 The AQ should be perfect. Quote BigPimpin91's Banging Music
tyyyyyleerr Posted September 22, 2008 Author Report Posted September 22, 2008 The AQ should be perfect. yeah a friend of mine had the same setup and it sounded realyly good Quote
Kapetol T Posted September 22, 2008 Report Posted September 22, 2008 How close to the rated power do those AudioQue 2200D's do? Quote
tyyyyyleerr Posted September 22, 2008 Author Report Posted September 22, 2008 How close to the rated power do those AudioQue 2200D's do? 1300 at two ohm and 2100-2200 at 1 ohm Quote
tyyyyyleerr Posted September 22, 2008 Author Report Posted September 22, 2008 How close to the rated power do those AudioQue 2200D's do? so all in all there pretty spot on with there ratings Quote
Kapetol T Posted September 22, 2008 Report Posted September 22, 2008 1300 at two ohm and 2100-2200 at 1 ohm Really? Damn, if that is the case I'm gettin me one! I've been lookin for an amp to push 2 Fi Q's Good luck with your BTL man Quote
kentb Posted September 22, 2008 Report Posted September 22, 2008 i would say from my own experience, with only 2.2k watts power the btl's won't be moving much. go for 3k watts, so i say get the aq3500d if you can. Quote New System 2 10" Fi SSD, Sundown 1500d Build I build and design enclosures(cheap price), PM ME Kicker L7 Navigator(plexiglass, fiberglass, aeroport) Build BTL 18" Escalade(plexiglass, battery tray) Build http://www.kentbaudio.com Old System
tyyyyyleerr Posted September 22, 2008 Author Report Posted September 22, 2008 i would say from my own experience, with only 2.2k watts power the btl's won't be moving much.go for 3k watts, so i say get the aq3500d if you can. eventually i will but since the kicker incident im gonna run the btl of the 2200 for a while and get the 3500 later on Quote
Mosin Posted September 22, 2008 Report Posted September 22, 2008 some of you might remeber my last blog i was installing 4 kicker l7s 15s well i had an amp laying around it pushes about 800 watts i hooked it up to one of the kickers and it seperated the cone from the coil it completly broke in half so i sold the remaining three not wanting to take the chance the kicker was in a 5 cubft box ported to about 35hz but anyway i have now ordered 1 18 inch fi btl fully loaded it will be here next week im going to hook it up to an audioque 2200d amplifier and a kinetik hc1400 battery or up all i need now is an altemator if necessary and if so wat amp alt would be best Do you have pics of above stated woofers? Quote Derp.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.