Help >>> Wiring Quad Alts.. And Running 0g.

[missinglink]

In the hummer I ran 1 1/0 from each alt to each side battery bank and a 1/0 to the main battery. 2-1/0 Grounds are from alt bracket to frame , then last battery in line to frame , from that frame location to the disto block , then to the amps.

Only fused mine before each amp.

Edit) I didn't do the jumper between the alts , was not really a noticable difference on mine.

MLA

Edited October 13, 2008 by missinglink

[trulywickedcustoms]

In the hummer I ran 1 1/0 from each alt to each side battery bank and a 1/0 to the main battery. 2-1/0 Grounds are from alt bracket to frame , then last battery in line to frame , from that frame location to the disto block , then to the amps.

Only fused mine before each amp.

Edit) I didn't do the jumper between the alts , was not really a noticable difference on mine.

MLA

thanks bro!

ill be doing this soon... ill just have to run it w/o the jumpers and find some spare wire and do some makeshift jumpers and see if theres a diff... but you did not fuse anything untill b4 the amps??? if so thatl save me a hellova lot of fuses and terminals

[flashlight_65]

so running 1/0 from each alt to each battery or battery bank would you need 2 fuses per run of 1/0 or just 1 18" from each batt. or the battery bank?

[Siete_Cinqo]

so running 1/0 from each alt to each battery or battery bank would you need 2 fuses per run of 1/0 or just 1 18" from each batt. or the battery bank?

2 per 1/0 run.

fuse after alt. then again b4 battery bank in the back. At least that's how I would do it. But I fused from alts to front bat. then fused right afer front bat. and again b4 battery bank in the back, per run of 1/0