Enclosure For My Car

[thien211]

i brought two rockford fosgate T215D4, and now not sure about the design, can some1 help me?

the max outside dimension is width-43inch, height- ~18inch, depth-~18inch. (height and depth can extend) i will use 3/4'' wood,

to fit my toyota land cruser.

I dun know the inner design of the enclosure, bro help me.

Thank you.

[Kian]

Honestly i would go the max you can. here is a website for the box calculator http://www.reaudio.com/speaker_box/LPort_Box_Calc.html it helped me design my box.

[banginAltima]

I think you need to make the box a little bigger. With the dimensions you have now your box will be right at 5 cubic feet.

Those sub will probably like 6 cubes or more...

[thien211]

thank you bro, hmm, how is the inner design of the sub enclosure?

[thien211]

bro, 1 more question. the reaudio enclosure calculator is for 1 port hole, how abt i make it two?

the Rec. Vented Enclosure is 3.25cu ft, so twice of it is 6.50 cu ft, so the volume need really abt 6.50? or more or less? what the effect is less or more?

[thien211]

halo?

[thien211]

thank you bro, your info help a lot

[David]

you need more than 6.5 cubes, the speaker and port will eat up some of that box space

[raytard]

6.5 is reccomended, but you can always go a little more or less

your port will likely take up a cubic foot or two depending on tuning, so plan on going a bit bigger

if you end up with less than 6.5, and a smaller than usual port, u get a "safer" box, where the output is decreased, but the subs can handle more power and are harder to bottom out, but overall they arent as loud and quality suffers a bit

going too large, it gets louder, and probably lower, but its much easier to do damage to the subs

[a_steezy]

you need more than 6.5 cubes, the speaker and port will eat up some of that box space

some... try alot haha, mine went from over 6ft^3 externally to 4ft^3 after the port and sub...

ima say use the max dimensions you can