Need Help With A T-line Box

[bunkerking09]

I'm wanting to make a T-Line box for my Death Penalty, it was suggested to me by numerous people. I read the tutorial on it, and it still didnt make much sense to me.

Someone wanna dumb it down and possibly build a box for me??

Need it at 2.5-3 cubes tuned to 35 hz.

Thanks,

Matt

[Torres]

a t-line is basically sub that sits in a port that is curved around. there's no real cubic space in a t-line. you basically want the port area to directly relate to the cone area of the sub. you need some of the tech specs of the sub as well to do it properly

[amazinblazin10]

yeah pretty much what expo said. I just recently built a t-line and i would would by far recommend it but you gotta make sure your QTs and QMS are low, as it is stated in foreverbumpin's t-line tutorial. And as to what expo said, is pretty accurate you want your port area to match pretty close to the cone area of your sub, and then you determine however long to make your port by how many hertz you wanna tune it too. hope this is a little help. but for sure go for the t-line if you can.

[aznboi3644]

a QWP is going to be a lot bigger than 3 cubes buddy...rethink your enclosure options