mcj3000 Posted November 16, 2008 Report Share Posted November 16, 2008 I'm new to the forums, as well as building boxes, but figured this would be the best place to acquire help. I have 4 12'' Alpine type R's, and was wondering the best possible cubic feet, as well as port size for a custom box. I'm just going for the best possible scenario. Maybe some of you with more experience could share some knowledge. Thanks. Link to comment Share on other sites More sharing options...
galacticmonkey Posted November 17, 2008 Report Share Posted November 17, 2008 Ive got quite a bit of experience with Type Rs and I could design you a slammin box. Check out my thread. I do designs for a couple bucks. http://www.stevemeadedesigns.com/board/ind...showtopic=32100 Link to comment Share on other sites More sharing options...
mcj3000 Posted November 18, 2008 Author Report Share Posted November 18, 2008 I am very interested. Like I said, I just want a box that will pound. You said you had experience with type r's, so I appreciate the help. I have two RF T-10001bd to power them. My current box is flexing, so It wont last long. I will post up the length and width tomorrow when I can get out there with a tape measure. Shoot me a price back. Thanks. Link to comment Share on other sites More sharing options...
mcj3000 Posted November 19, 2008 Author Report Share Posted November 19, 2008 Ive got quite a bit of experience with Type Rs and I could design you a slammin box. Check out my thread. I do designs for a couple bucks.http://www.stevemeadedesigns.com/board/ind...showtopic=32100 OK. I have dimensions. L=40'' W=31'' These are of my current box, which is almost what It has to be. The height can vary. Please let me know what you can do for me. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.