Bass4Lyfe Posted January 21, 2009 Report Share Posted January 21, 2009 (edited) So my Serp belt keeps slipping for weeks now, it's getting really fustrating. I've looked at so many places online some say use a bar of soap but that sounds stupid to me it will eliminate the noise but escalate the problem... Short of ruining my bearings in the pulleys idk .... The belt is tight but should I use a sticky belt dressing agent? Or clean the pully off with wire brush or something? Anybody had this problem? Edited January 21, 2009 by Bass4Lyfe Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
Rose-Villian Posted January 21, 2009 Report Share Posted January 21, 2009 I have it ALL day everyday!! When I drive and My tranny shifts It Squeals or when Im beating On the system and Using the alts Its Sqeauls NON stop until i shut off the beat! Quote WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted January 21, 2009 Author Report Share Posted January 21, 2009 did u do anything to fix it? Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
Rose-Villian Posted January 21, 2009 Report Share Posted January 21, 2009 nope...I tried The belt dressing and Only works for about 5minutes then makes it WAY worse until it burns off the dressing...then goes back to normal...lol Its annoying makes people think im driving a Hoopty... Need to trade out my pullys to Ball bearing pullys... i guess... ?) Quote WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted January 21, 2009 Author Report Share Posted January 21, 2009 hmm ok. i'll see if anyone else chimes in Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
Dr. Johnson Posted January 21, 2009 Report Share Posted January 21, 2009 What type of belt are you using? (name of manufacturer) Quote Link to comment Share on other sites More sharing options...
Rose-Villian Posted January 21, 2009 Report Share Posted January 21, 2009 I use Napa Brand.... There Micro Tech... Good belts And expensive $70.... They Only make 8groove belts for my truck and i gotta cut off 2 grooves with a razor blade it sucks!!! Quote WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
Loudcav Posted January 21, 2009 Report Share Posted January 21, 2009 thats your problem Elvis see if you cant get a 6 groove belt in the lenght you need dont look at vehicle specifics Quote Link to comment Share on other sites More sharing options...
Rose-Villian Posted January 21, 2009 Report Share Posted January 21, 2009 I need like a 224" belt They dont make em that big in 6 groove... I checked... Even steve has the same problem he has to make his belts aswell! Quote WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
Dr. Johnson Posted January 21, 2009 Report Share Posted January 21, 2009 Goodyear Gatorbacks are some super belts. very very quiet bets..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.