zfrerichs Posted January 26, 2009 Report Posted January 26, 2009 how dou you get the tweeter out of the mounting bracket? Roseville, CA
Gq85 Posted January 26, 2009 Report Posted January 26, 2009 You got to twist it off counter clockwise it's a little difficult to remove. I had trouble removing mine.
wL<3bass Posted January 26, 2009 Report Posted January 26, 2009 You got to twist it off counter clockwise it's a little difficult to remove. I had trouble removing mine. My RSDs are the same way and can be a bit of a hassle.... :censored: I ended up pinching the skin of the tip of my finger removing mine.... Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Gq85 Posted January 26, 2009 Report Posted January 26, 2009 lol. I ended up braking the RF logo off mine.
zfrerichs Posted January 26, 2009 Author Report Posted January 26, 2009 thanks i got it out and didnt want to fuck up the wiring Roseville, CA
zfrerichs Posted January 26, 2009 Author Report Posted January 26, 2009 i took the grill off and then got my fingernail on the little slot they cut out for the solder on top Roseville, CA
Recommended Posts
Archived
This topic is now archived and is closed to further replies.