loganberry Posted February 1, 2009 Report Posted February 1, 2009 well long story short, the blowthrough wont be at ar, i still will be there and still competing!, so ive decided to do something quick in the f-150, its smaller than the x inside so should make it easy and seem louder. all the wiring is done and batteries are wired, gotta hook up the amps tommorro and do the box..these box designs are VERY rough so please stay away from that. the box will be sitting on the back seat, i dont care if it looks like ass im not taking the seat out for something im going to use for 2 days. here are my options sub forward port forward (one sub goes into the back of each seat, port in the middle where there is nothing) sub up port forward (through the spot between the 2 seats) or sub up port up. i think that sub forward port forward will be the best for me, but i wanna know your opinions keep the shit outa here i will still be at autorama, the box sketch's do look horable i did them in 2 minutes, ill make sure the subs have the right space and everything this is meerly something quick. in the designs the only way i could do it fast was to lower down the "port" all the way, i wont be doing that to the top and bottom of the box it will be flush and flat and everything so thats not an issue. My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk
loganberry Posted February 1, 2009 Author Report Posted February 1, 2009 i think ive decided on port forward sub forward, each sub firing into the back seats and port in the middle..i think it will be fine My F-150 Build GET ON THE BANDWAGON what if they tried messing with the amps when the subs werent louder hahah jk
Recommended Posts
Archived
This topic is now archived and is closed to further replies.