milesmiles Posted March 23, 2009 Report Posted March 23, 2009 How would I install one of these for my subwoofer? Quote
roscoe1129 Posted March 23, 2009 Report Posted March 23, 2009 generally those are used to block bass but they go inline with your rca before the amp Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
brewer_brewer Posted March 23, 2009 Report Posted March 23, 2009 what frequency range are you trying to eliminate? Quote REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt"
milesmiles Posted March 23, 2009 Author Report Posted March 23, 2009 This is a low pass so it eliminates all but the bass. But what do you mean "in line" with the RCA? Quote
milesmiles Posted March 23, 2009 Author Report Posted March 23, 2009 I am trying to eliminate all frequencies above 100 hz. This model is a 100 hz low pass. Quote
ISO Posted March 23, 2009 Report Posted March 23, 2009 Inline: Instead of just pluging your RCA's in to the amp, put that between the RCA's and the amp. I bought a set of those for a 70 hertz lowpass and it dulled down the sound of the output to my subs that I took it out within 5 minutes of trying it and was pissed that it attenuated my output so horribly. I consider those a very,very last resort. Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
milesmiles Posted March 23, 2009 Author Report Posted March 23, 2009 Are there any better options? Quote
raytard Posted March 23, 2009 Report Posted March 23, 2009 yes, use the lpf function of your amp or headunit,that is the simplest (and free) option or get a processor/eq of some kind, look at audiocontrol or the rockford 360.2 Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC
milesmiles Posted March 23, 2009 Author Report Posted March 23, 2009 I can't find a 4 ohms stable amp with a LPF. Does anyone know of one? And thanks for the processor ideas. Quote
Mikesmith0890 Posted March 23, 2009 Report Posted March 23, 2009 Most amps have them, My Alpine MRP-m500 has one, the rockford 500 i used to have had one, acutally all sub amps ive had have had one.. and 99% of amps are should be 4 ohm stable.. Quote AlphaDamp Sound Deadening CDL Mat - The best Vibration Damper Ever! I'd hit that so fucking hard whoever pulled me out would be King of England. Lol... looks like we were on the same page. Car-B-Ques suck.ya, tires and paint burning make the marshmallows taste funny.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.