808head Posted June 2, 2009 Report Share Posted June 2, 2009 i jus ordered a spl gorilla 3000..has any one heard ne thing bad or good..ive had the 1500 before and that one did pretty good... 92 Black Acura Vigor (Blacura) pioneer head unit powerbass s-series 6 1/2 components in front 2 stock tweets up on the dash 2 stock 1 inch speakers by the front dome light alpine spg-17c2 6/12s in the back,custom fiberglass pods for them hifonics MX-3 sound processor/line driver BIG 3 done stock alt...not for long 1/0G all around optima yellowtop up front kinetik 2400 in the back Powerbass XA3000d sub amp 2 MTX 9500 12s, single 4 ohm vc (so only doing about 2200w) 8awg wire for the subs Link to comment Share on other sites More sharing options...
Big J Posted June 2, 2009 Report Share Posted June 2, 2009 Nope never head of them. Specs? 2 DD 9515 1 Soundown SAZ-3000D 2 Optima Redtops Big 3 upgrade Hitting 151.1db Link to comment Share on other sites More sharing options...
fischy fisch Posted June 2, 2009 Report Share Posted June 2, 2009 the amp is crap very cheap quality but other than that never had a issue with any of my spl amps they hold up for a long time if treated right my.02 lol. but i haven't and i don't plan on it. plus i'd probably miss and hit her belly button or her ear or something. lol. Link to comment Share on other sites More sharing options...
Beanz Posted June 2, 2009 Report Share Posted June 2, 2009 BRAND NEW SPL GRLA3000/1D 3000W Max, Gorilla Series Class D Digital Monoblock Amplifier With Wired Remote Bass Level Control RMS Power Rating: 4 ohms: 900 watts x 1 chan.; 2 ohms: 1300 watts x 1 chan.; 1 ohm: 1700 watts x 1 chan. Max power output: 3000 Watts Regulated MOSFET PMW power supply Wired remote bass level control included All connections on the front side for easy installation LED power indicators Bass Boost (0-18 dB bass boost at 45 Hz) Phase Shift (180 Degrees) Mono channel operation Bridged Synchronization (Strap amps together to double your power!) Preamp RCA outputs 3-Way system protection circuitry (thermal, overload, and short protection) Brilliant silver texture coat finish Heavy duty die cast aluminum alloy heatsink for extreme heat dissipation Silver-plated RCA level inputs Silver-plated screw terminals Variable low-pass filter (40-200 Hz, 12 dB/octave) Subsonic Filter (12 dB at 20-50 Hz) Frequency response: 15-150 Hz Dimensions: 11-3/8"L x 8-1/4"W x 2-1/8"H 4-gauge power and ground wiring is required for installation. (Contact us if more information needed.) all for 170 to 180 bucks IDK man may not even get 1200 out of it maybe less That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
808head Posted June 2, 2009 Author Report Share Posted June 2, 2009 BRAND NEW SPL GRLA3000/1D 3000W Max, Gorilla Series Class D Digital Monoblock Amplifier With Wired Remote Bass Level Control RMS Power Rating: 4 ohms: 900 watts x 1 chan.; 2 ohms: 1300 watts x 1 chan.; 1 ohm: 1700 watts x 1 chan. Max power output: 3000 Watts Regulated MOSFET PMW power supply Wired remote bass level control included All connections on the front side for easy installation LED power indicators Bass Boost (0-18 dB bass boost at 45 Hz) Phase Shift (180 Degrees) Mono channel operation Bridged Synchronization (Strap amps together to double your power!) Preamp RCA outputs 3-Way system protection circuitry (thermal, overload, and short protection) Brilliant silver texture coat finish Heavy duty die cast aluminum alloy heatsink for extreme heat dissipation Silver-plated RCA level inputs Silver-plated screw terminals Variable low-pass filter (40-200 Hz, 12 dB/octave) Subsonic Filter (12 dB at 20-50 Hz) Frequency response: 15-150 Hz Dimensions: 11-3/8"L x 8-1/4"W x 2-1/8"H 4-gauge power and ground wiring is required for installation. (Contact us if more information needed.) all for 170 to 180 bucks IDK man may not even get 1200 out of it maybe less dude it doesent say that on ther website..it gets 2200 at one ohm n max is 3000...http://www.splaudio.ca/fr/catalogue/p2-p3.html 92 Black Acura Vigor (Blacura) pioneer head unit powerbass s-series 6 1/2 components in front 2 stock tweets up on the dash 2 stock 1 inch speakers by the front dome light alpine spg-17c2 6/12s in the back,custom fiberglass pods for them hifonics MX-3 sound processor/line driver BIG 3 done stock alt...not for long 1/0G all around optima yellowtop up front kinetik 2400 in the back Powerbass XA3000d sub amp 2 MTX 9500 12s, single 4 ohm vc (so only doing about 2200w) 8awg wire for the subs Link to comment Share on other sites More sharing options...
Beanz Posted June 2, 2009 Report Share Posted June 2, 2009 yeah but they are talking about putting in 4 gauge wiring most big amps that i see that do rated 2000 or up at least require 0 gauge to get the current flowing better to make that power. That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
808head Posted June 2, 2009 Author Report Share Posted June 2, 2009 well i kno but i got 4 in ther now from ma 1500 so the 0 gauge is gna have to wait till next paycheck ha 92 Black Acura Vigor (Blacura) pioneer head unit powerbass s-series 6 1/2 components in front 2 stock tweets up on the dash 2 stock 1 inch speakers by the front dome light alpine spg-17c2 6/12s in the back,custom fiberglass pods for them hifonics MX-3 sound processor/line driver BIG 3 done stock alt...not for long 1/0G all around optima yellowtop up front kinetik 2400 in the back Powerbass XA3000d sub amp 2 MTX 9500 12s, single 4 ohm vc (so only doing about 2200w) 8awg wire for the subs Link to comment Share on other sites More sharing options...
~digital~bass~ Posted June 2, 2009 Report Share Posted June 2, 2009 My bit sucks. I have to push hard as f$%# to make it cut. It is Bosch and I got it from Lowe's. Where are everyone else getting theirs. Ask question after? Do you also measure once cut twice? Car Audio + Bodyboarding/Longboarding = LIFE!!! Link to comment Share on other sites More sharing options...
lanman31337 Posted June 2, 2009 Report Share Posted June 2, 2009 Aren't SPL and Power Acoustik sister companies? 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
fischy fisch Posted June 2, 2009 Report Share Posted June 2, 2009 Aren't SPL and Power Acoustik sister companies?yes they are but power ackoustik is the crapper of the two lol. but i haven't and i don't plan on it. plus i'd probably miss and hit her belly button or her ear or something. lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.