Help With Ported Box?

[mxdustinmx]

Well, right now i have a sealed box that my 2 12' kicker cvx's are in. ( The Box is 30 x 13 x 16 ). I would like to build a new box that is ported. I can have my new box up to 42 x 15 x 16 ( I would like it to fit on my backseat so if its 42 inches somebody can still sit back there ). Can somebody help me draw out a box that will be ported? Sorry im a noob at this stuff and i would like to make the box where the subs sound the best. The box can be no longer than 42 inches and the width cant be more than 15 ( or the subs will hit my seat ). This is probaly confusing. lol

Heres how its going to sit on my back seat.. and by the way im using a hifonics 1606d amp

Thanks!

[Jville140db]

what freq are you trying to get out of the box

[mxdustinmx]

I have no clue. I just want them to be as loud as i could get them. What would y'all think?

[Jville140db]

what kind of music then maybe that will give me an idea

[mxdustinmx]

All rap

[Jville140db]

ok so probably i low tune then let me see what i can come up with

[mxdustinmx]

Thanks dude

Edited June 16, 2009 by mxdustinmx

[hondaonchrome]

I have 1 cvx 12 ported at 33hz with a 3.8 cube gross box and it is SLAMMIN for just 1 sub, but will prolly build a lil smaller box soon though, kicker recommends a max ported box to be 2.25.

Good luck and keep us updated.......

[Decaf]

there ya go

if you need a cut sheet let me know... 3d design cost a few bucks per paypal

those sound best tuned right around 34hz... so i just used max dimensions... id brace the inside too with dowel or allthread

[Jville140db]

there ya go

if you need a cut sheet let me know... 3d design cost a few bucks per paypal

those sound best tuned right around 34hz... so i just used max dimensions... id brace the inside too with dowel or allthread

Yep i got the same numbers 14.5h x 3w x 22.5L port should tune to about 32 to 33hz hey decaf what program is that just curious

Edited June 16, 2009 by Jville140db