Crump Posted June 27, 2009 Report Share Posted June 27, 2009 I need to get a 60 degree angle. This is what it should look like What the amps are on, I need at 60 degrees. My saw goes to 45, so idk how im going to accomplish this. Any ideas? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
87accord Posted June 27, 2009 Report Share Posted June 27, 2009 (edited) are you trying to cut the piece right under the amp Edited June 27, 2009 by 87accord new system in the works (3) DC lvl 4xls 15's (one of three are here) (2) DD z1 (done) old kenwood four ch 4 runs of 2/0 (done) ? 200 amp alt may two ?? Link to comment Share on other sites More sharing options...
Crump Posted June 27, 2009 Author Report Share Posted June 27, 2009 are you trying to cut the piece right under the amp Yeah just the tip of it so it make it a 60 degree angle Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
87accord Posted June 27, 2009 Report Share Posted June 27, 2009 the only thing i can think of it cut it to 45 dreg and sand it the rest of the way but it late so brain is not all on new system in the works (3) DC lvl 4xls 15's (one of three are here) (2) DD z1 (done) old kenwood four ch 4 runs of 2/0 (done) ? 200 amp alt may two ?? Link to comment Share on other sites More sharing options...
Ray Posted June 27, 2009 Report Share Posted June 27, 2009 It can be done but it's not for rookies if I were u I would just cut the side pieces to the angle you want then 30 deg the top plate and use a 1/2 roundover will be nice looking on the top and sit at the correct angle 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz Link to comment Share on other sites More sharing options...
Crump Posted June 27, 2009 Author Report Share Posted June 27, 2009 My design pretty much wont allow me to do that, my dad has been a woodworker for about 20 years and ill ask him, but i need to attach the sides while inside the car so i can run my wires to the amps. and so ill be able to screw the back of the rack into the back of my box. Ill have a build log if im not explaining it right. Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
87accord Posted June 27, 2009 Report Share Posted June 27, 2009 ok i can think of only on other way i had to go look at my saw tak a scrap piece of wood cut it at 30 dreg then take the piece you want for the amp borad that will give you the 60 dregs you need if you i can take some pic for you new system in the works (3) DC lvl 4xls 15's (one of three are here) (2) DD z1 (done) old kenwood four ch 4 runs of 2/0 (done) ? 200 amp alt may two ?? Link to comment Share on other sites More sharing options...
Crump Posted June 27, 2009 Author Report Share Posted June 27, 2009 ok i can think of only on other way i had to go look at my sawtak a scrap piece of wood cut it at 30 dreg then take the piece you want for the amp borad that will give you the 60 dregs you need if you i can take some pic for you Thats what i thought but i have a vertical peice and that would only work for a horizontal piece or top plate, but i just dont have enough space. Cuz then i might as well use a 45 degree angle. Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Crump Posted June 27, 2009 Author Report Share Posted June 27, 2009 Got a new idea ill try to draw it out quick Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Crump Posted June 27, 2009 Author Report Share Posted June 27, 2009 pretty much Ray said. LMK what you think Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Recommended Posts