sInIstIr Posted June 30, 2009 Report Share Posted June 30, 2009 (edited) Is it possible to even do this. how can i wire a Powerbass 1000.1 http://www.sonicelectronix.com/item_7369_P...ampaign=froogle to 4 Memphis 12" pr's DVC The box is 4 UP Port towards hatch. port tuned 32hz If not possible can someone recommend me a better amp for this setup? Edited June 30, 2009 by sInIstIr Quote Link to comment Share on other sites More sharing options...
abervintageman42 Posted July 1, 2009 Report Share Posted July 1, 2009 well you can wire it to either 0.5 ohms or 2 ohms, at 0.5 ohms you greatly increase the chance of blowing the amp and causing damage, at 2 ohms you are going to underpower the subs Quote Link to comment Share on other sites More sharing options...
Beanz Posted July 1, 2009 Report Share Posted July 1, 2009 what coils are they 2 ohm or 4 ohm? Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
abervintageman42 Posted July 2, 2009 Report Share Posted July 2, 2009 what coils are they 2 ohm or 4 ohm? memphis only makes single 4 and dual 4 in the prs Quote Link to comment Share on other sites More sharing options...
sInIstIr Posted July 2, 2009 Author Report Share Posted July 2, 2009 memphis only makes single 4 and dual 4 in the prs fuck , well can anyone recommend me a nice amp to run those 4 pr's on? Quote Link to comment Share on other sites More sharing options...
abervintageman42 Posted July 3, 2009 Report Share Posted July 3, 2009 fuck ,well can anyone recommend me a nice amp to run those 4 pr's on? http://www.sonicelectronix.com/item_14910_...MF40001-D-.html not the best but i have had good luck with my power acoustik amp Quote Link to comment Share on other sites More sharing options...
shainemcconnell Posted July 3, 2009 Report Share Posted July 3, 2009 (edited) you should look at the diablo amps...the 1000 might work nice for ya... http://diabloaudiotechnologies.com/products.html they have some testing numbers int the diablo audio technologies section of this forum in the manufacturers section Edited July 3, 2009 by shainemcconnell Quote 2010 IDBL Rookie 1 North American Champion 2009 IDBL Rookie 1 Fl State Champion 2009 EBB Fly Weight 3rd Place Fl State Finals 2006 Silver Grand Prix GXP :Diablo Audio Hellfire 1000.1, JL Audio 300/4, One 13W7, ZR650, VR690, JL Cleansweep setup. Team Pure Pressure Link to comment Share on other sites More sharing options...
sInIstIr Posted July 3, 2009 Author Report Share Posted July 3, 2009 so wat ur sayin is get the diablo 1000.1 n wire the 4ohm DVC PR 12's at 2ohms... thats gonna be 500 whats, im tryin 2 push 1000, the PR's take 250rms a piece. Quote Link to comment Share on other sites More sharing options...
alvitae Posted July 3, 2009 Report Share Posted July 3, 2009 I have a 2 of those PB asa 1000d. I am in no way saying to do this but just letting you know what I have done and what they are capable of. I have 2 3xl dvc 1 ohms. I have each amp on one sub at a half ohm with a 60 amp alternator and two Kinetik 1800's. No problems so far. Last weekend I entered a competition that went by amp size so I hooked both subs up to one amp making it a quarter ohm. I had to do 6 runs because it was elimination style. It was a hot day. Forgot my tone cd so that was on music. Took first place. Not a problem with the amp at all. Of course I may get a lot of box rise and some one else may not. Plus competing is my hobby so if I blow an amp I just buy a new one and call it part of the game. Quote Link to comment Share on other sites More sharing options...
sInIstIr Posted July 3, 2009 Author Report Share Posted July 3, 2009 I have a 2 of those PB asa 1000d. I am in no way saying to do this but just letting you know what I have done and what they are capable of. I have 2 3xl dvc 1 ohms. I have each amp on one sub at a half ohm with a 60 amp alternator and two Kinetik 1800's. No problems so far.Last weekend I entered a competition that went by amp size so I hooked both subs up to one amp making it a quarter ohm. I had to do 6 runs because it was elimination style. It was a hot day. Forgot my tone cd so that was on music. Took first place. Not a problem with the amp at all. Of course I may get a lot of box rise and some one else may not. Plus competing is my hobby so if I blow an amp I just buy a new one and call it part of the game. all im tryin to say is i have the amp from my old system in my truck but i need to know what would be a good setup for me for a decent price Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.