shainemcconnell Posted July 2, 2009 Report Posted July 2, 2009 Does the curve of the flare in the kerfed box add any extra to the length of the port.. I am thinking that it does not if flared on both sides of the port 2010 IDBL Rookie 1 North American Champion 2009 IDBL Rookie 1 Fl State Champion 2009 EBB Fly Weight 3rd Place Fl State Finals 2006 Silver Grand Prix GXP :Diablo Audio Hellfire 1000.1, JL Audio 300/4, One 13W7, ZR650, VR690, JL Cleansweep setup. Team Pure Pressure
shainemcconnell Posted July 2, 2009 Author Report Posted July 2, 2009 ...guessing opinions vary on this....I will just assume that they do not....if they actually do add a correction factor length to the port it will just end up tuned a bit lowwer... after I build a box or 2 I will let you all know what I think 2010 IDBL Rookie 1 North American Champion 2009 IDBL Rookie 1 Fl State Champion 2009 EBB Fly Weight 3rd Place Fl State Finals 2006 Silver Grand Prix GXP :Diablo Audio Hellfire 1000.1, JL Audio 300/4, One 13W7, ZR650, VR690, JL Cleansweep setup. Team Pure Pressure
Team Nemesis-DJ Posted July 2, 2009 Report Posted July 2, 2009 Yes it does ...should be accounted in the length
Chris from Mi Posted July 2, 2009 Report Posted July 2, 2009 with flared round ports you need about an inch longer of port with the flared ends on vs straight pipe, a good size kerf probably need more than that Orion 2500D, Jbl Gto 75.4 Team Wolfpack Audio FSQ 15" d2, mb quart xover, tweets peerless 6.5 mids Alpine cda-105 optima up front Knu klm 1/0
shainemcconnell Posted July 2, 2009 Author Report Posted July 2, 2009 hmmm.....any ideas how to accurately account for that........we are probably going to bend the wood 90 degrees (quarter circle) with about a 2.5 in Diameter. 2010 IDBL Rookie 1 North American Champion 2009 IDBL Rookie 1 Fl State Champion 2009 EBB Fly Weight 3rd Place Fl State Finals 2006 Silver Grand Prix GXP :Diablo Audio Hellfire 1000.1, JL Audio 300/4, One 13W7, ZR650, VR690, JL Cleansweep setup. Team Pure Pressure
Recommended Posts
Archived
This topic is now archived and is closed to further replies.