Rogers Posted July 11, 2009 Report Share Posted July 11, 2009 ok so i got a fuseblock from ebay that has a voltage readout... i think its made by stingpro... anyways it has a blue wire comming from the voltage readout screen.... i think it is for the remote wire, to power the led display and to make it turn on and off when the amp and hu do... but i could be wrong... the other though was that its supposed to be connected to the battery to show the batterys voltage... but i dont think that is the case since there is no ground wire for the fuseblock... is it simply just a remote wire? http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
Lowroll Posted July 11, 2009 Report Share Posted July 11, 2009 I have a scoche efx (think i spelled it right) anl fuse holder with the digital readout but it has no remote wire or anything. just power in and out. Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Rogers Posted July 11, 2009 Author Report Share Posted July 11, 2009 i sent them a question on ebay... asking what it was for.... and they replied that they have no support for the product, and that it needs to be installed by a shop for the warranty to be valid.... 1st of all im not paying 50 bucks for someone to put a 20 dollar fuse block in.... and secondly... alot of installers are dumb and would be scratching thier heads over it too.... it would have been nice if their product would have came with instructions like every other product on the market... damn nice looking fuse block though... but im guessing since the wire is blue its for the remote lead... I have a scoche efx (think i spelled it right) anl fuse holder with the digital readout but it has no remote wire or anything. just power in and out. yeah i was going to get one of those but i lost the high bid on it within the last minute of the auction... i was pissed... i had the high bid for 2 days and up untill i would say the last 30 seconds... outbid by 50 frickin cents http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
DHFHades Posted July 11, 2009 Report Share Posted July 11, 2009 is it simply just a remote wire? should be 1990 Jeep Cherokee 4X4 Pioneer DEH-P2900MP, Big 3 done in 1/0, 1 run 1/0 ran to amp DAT HF1000.1 #007 powering a DC lvl4 15 DAT HR 4085 prototype powering 2 Selenium 6s and 2 no name tweeters running active 1st place in AS3 @ Surf City Sound Off, 140.8 @ 45hz @ the headrest. rebuild coming soon to get a better score "I regard the brain as a computer which will stop working when its components fail. There is no heaven of afterlife for broken down computers; that is a fairy story for people who are afraid of the dark." Link to comment Share on other sites More sharing options...
Lowroll Posted July 11, 2009 Report Share Posted July 11, 2009 I got mine from darvex for $27. havent got it hooked up yet but it looks nice. Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
BulletInjection Posted July 11, 2009 Report Share Posted July 11, 2009 My buddy is one of 2 licensed efx dealers in GA and I was JUST looking at that thing today, but it sounds to me like a remote wire, only logical thing really. My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.