JBIRD Posted July 29, 2009 Report Share Posted July 29, 2009 Alright well I have an 03 Chevy tahoe. with 2 12" pioneer TS-w308d4's and they arent nothing special so i plan on getting two DD 3500 12s eventually. Now i want to build a vent port box that will be mainly built for the DDs but wouldnt sound awful with the pioneers in them. I want to make the box 48" wide which is alittle shorter then the width of the trunk. and about 24ish"deep and about 16" high. so i was just wondering how i should port it(a port on each side, one big port on one side or whatever). If anyone could draw something out for me that would be very nice. Thanks any help would be appreciated Quote Link to comment Share on other sites More sharing options...
enemyofsilence Posted July 29, 2009 Report Share Posted July 29, 2009 hit up footlongsam. he can design you a box for a small fee and hes an awesome designer Quote Team Bass-Hz Link to comment Share on other sites More sharing options...
loburbon Posted July 29, 2009 Report Share Posted July 29, 2009 i dont know how much port area the pioneers call for, but the dd subs call for massive port area. and they are picky. so that may not be the best idea Quote 2000 gmc yukon 4 sundown Zv3 15's 4 dd m2a's kenwood kdc-x994 2 batcap 4000's 1 batcap 2000 dual alts. 154@37hz and climbing http://www.cardomain.com/ride/3231683 http://www.myspace.com/torque150 Link to comment Share on other sites More sharing options...
siucsaluki11 Posted July 30, 2009 Report Share Posted July 30, 2009 Even with having almost 17 in sq of port per cube that box would be way too big even after bracing im assuming. Thats closer to a 6.5 cube box. Im assuming that is way too big for those 12s. Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
JBIRD Posted July 30, 2009 Author Report Share Posted July 30, 2009 yea i think im just gona make one for the pioneers then get one made for the DDs. So im guessing i wouldnt need alot of port area for those little 12s Quote Link to comment Share on other sites More sharing options...
siucsaluki11 Posted July 30, 2009 Report Share Posted July 30, 2009 Dont make the one to the specs you listed for your dimmensions. like i said, with the dimmensions you gave that box is WAY too big. Those pioneers will not be happy Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
JBIRD Posted July 31, 2009 Author Report Share Posted July 31, 2009 Dont make the one to the specs you listed for your dimmensions. like i said, with the dimmensions you gave that box is WAY too big. Those pioneers will not be happy damn so if i make it the 48" or so long it still gona be to big?I want as wide as the back so it wont move around Quote Link to comment Share on other sites More sharing options...
siucsaluki11 Posted July 31, 2009 Report Share Posted July 31, 2009 14H x 48w x 15D and alot of port and that will get you close to 4 cubes tuned around 35 Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
JBIRD Posted August 1, 2009 Author Report Share Posted August 1, 2009 14H x 48w x 15D and alot of port and that will get you close to 4 cubes tuned around 35 ok but still leaves the question. How am i running the port? I was think just have it on the right side and running a vent from the other side to it(if that makes sense). Or port it in the middle? suggestions please. if anyone can just draw there ideas out on with like paint that would help alot. Quote Link to comment Share on other sites More sharing options...
siucsaluki11 Posted August 1, 2009 Report Share Posted August 1, 2009 Heres how i would lay it out Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.