1lownoma Posted July 30, 2009 Report Posted July 30, 2009 guys i need some serious help. I have a 2001 Tahoe that I have tried to install one of my old systems in with new wiring. First off the pioneer HU will power on but get absolutely no sound from other than the subs, if I turn off the HU and cycle the ignition it will allow sound to come throught the unit. Any ideas? I installed my highs amp and ran RCA's from the head unit in the same direction the subs are ran when all was said and done I had some serious engine noise. I figured first things first new ground. I ran a completely new ground all the way from the battery to a distribution block and grounded both the sub amp and the highs amp. Still got noise. So i completely un-installed the highs amp and returned everything back to the harness, now when I turn on the radio on any source i am getting feedback with KOEO and KOER even with the volume turned all the way down. Any help is appreciated. :censored:
AI James Posted July 30, 2009 Report Posted July 30, 2009 ground the RCA's on the headunit its an old pioneer they are notorious for ground noise
1lownoma Posted July 30, 2009 Author Report Posted July 30, 2009 ground the RCA's on the headunitits an old pioneer they are notorious for ground noise Ive heard that a few times but i am clueless on how to "ground" RCA's
Recommended Posts
Archived
This topic is now archived and is closed to further replies.