box help - regular cab pickup

[G_skillz81]

Guys, need some help with a box design

got an itch to hit a comp less than 2 weeks away

have a 2003 Dodge Ram reg cab

some room behind the driver seat - 20"w 16.5"h 13"d

sub - 10" TC Sounds TC9 based driver - 1000w rms (3" vc d2)

amp - Celestra DA2k (2000+ watts @1ohm)

Stock electrical - 136A alt. DieHard upfront, 0ga welding wire, Big 3

not sure if this needs to be here as I'm not shooting for an all out burp box, but I want the box to meter good just to see what this little sub can do

I'm thinking sub up, port up (or to the side - behind the center console)

Slot port is preffered (i know Aero's would be better, but I never had luck with them)...maybe external

want to try the tricks such as the resin 45's

can someone help me out with a design for a fee? or just throw some suggestions on internal volume and port dimensions

sub specs

Fs 35

Qts .45

Vas .45cf

xmax 22mm

Any benifit in running a second run of 0ga to the amp in my case? it pretty close, like 9-10' from the front bat....add an optima blue top by the amp? (meter with the car running)

Any input will be highly appreciated

[G_skillz81]

Anyone?

[99s10dowork]

i believe if you run 4 gauge you can be in the beginner class and you would do well seein as its a regular cab. not completely positive though

[Hugh G. Rection]

Guys, need some help with a box design

got an itch to hit a comp less than 2 weeks away

have a 2003 Dodge Ram reg cab

some room behind the driver seat - 20"w 16.5"h 13"d

sub - 10" TC Sounds TC9 based driver - 1000w rms (3" vc d2)

amp - Celestra DA2k (2000+ watts @1ohm)

Stock electrical - 136A alt. DieHard upfront, 0ga welding wire, Big 3

not sure if this needs to be here as I'm not shooting for an all out burp box, but I want the box to meter good just to see what this little sub can do

I'm thinking sub up, port up (or to the side - behind the center console)

Slot port is preffered (i know Aero's would be better, but I never had luck with them)...maybe external

want to try the tricks such as the resin 45's

can someone help me out with a design for a fee? or just throw some suggestions on internal volume and port dimensions

sub specs

Fs 35

Qts .45

Vas .45cf

xmax 22mm

Any benifit in running a second run of 0ga to the amp in my case? it pretty close, like 9-10' from the front bat....add an optima blue top by the amp? (meter with the car running)

Any input will be highly appreciated

in a regular cab pickup, you want the sub firing forward with the port to the side. for better results on the meter, built it with the sub firing forward on the passenger side, and the port firing to the side on the driver side. let the seat up as far as it will go, and have fun.

[G_skillz81]

in a regular cab pickup, you want the sub firing forward with the port to the side. for better results on the meter, built it with the sub firing forward on the passenger side, and the port firing to the side on the driver side. let the seat up as far as it will go, and have fun.

thanks for the tip! I was wondering if there was a major difference as far as placement is concerned