KRS Posted August 16, 2009 Report Posted August 16, 2009 So i have a 15" Fi SSD DVC 2ohm and i´m thinking about getting a AQ 1200D and i wanna run it in 2 ohm´s. How do i wire a 2 ohm sub to a 2 ohm load? Or, will the ssd handle the 1200 watt rms 1 ohm load? ** LMProductions **
Noobtastic14 Posted August 16, 2009 Report Posted August 16, 2009 With a Single Dual2ohm woofer you can wire to 1ohm or 4ohm -Drew I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew
CASZ71 Posted August 16, 2009 Report Posted August 16, 2009 wiring diagram.. Not sure if it can be done 2000 GMC sierra 1500 ext cab KMC XD Spy series rims Front doors Fosgate punch 6 1/2's stock tweets Rear doors Fosgate power 4x6's Probox 10 and box under rear seat Rockford fosgate R-500 Prime series amp (537 rms) 4 gauge wiring
Blue_C1500 Posted August 16, 2009 Report Posted August 16, 2009 So i have a 15" Fi SSD DVC 2ohm and i´m thinking about getting a AQ 1200D and i wanna run it in 2 ohm´s. How do i wire a 2 ohm sub to a 2 ohm load? Or, will the ssd handle the 1200 watt rms 1 ohm load? ** LMProductions ** You can't wire it to 2 ohms, only 1 or 4 ohms. I'm not familiar with that amp so I can't be any help with that, sorry. HU: Pioneer Highs: 2X 4X6"s, 2X 3.5"s, 4X 5.25" comps, Q-Logic kicks, and a Sundown SAX-125.2 Subs: 4 Nightshade 15s and Strapped SAZ-3500Ds <---Sundown FTW Electrical: dual DC Power 320s (ordered) and 2 D3400s up frt and 4 D2700s in the back .ʇı ɥʇıʍ ʞɔnɟ ʇ,uɐɔ noʎ 'ʞɔıp ǝɹos ɐ ǝʞı1 sı uʍopunS
rmzsuzuki89 Posted August 16, 2009 Report Posted August 16, 2009 Just wire to one ohm and watch your gains. My Feedback Thread http://www.stevemeadedesigns.com/board/topic/103868-official-rmzsuzuki89-feedback-thread/page__pid__1441542#entry1441542
KRS Posted August 16, 2009 Author Report Posted August 16, 2009 Just wire to one ohm and watch your gains. Any suggesions like on what I should have in mind whan overpowering a sub that much? on gains and stuff like that...
hdrox88 Posted August 16, 2009 Report Posted August 16, 2009 Any suggesions like on what I should have in mind whan overpowering a sub that much? on gains and stuff like that... You could use a DMM and gain down. There is a sticky in the amp section on how to set gain with a DMM. That way you can tell approximately what you are sending to your sub.
KRS Posted August 16, 2009 Author Report Posted August 16, 2009 You could use a DMM and gain down. There is a sticky in the amp section on how to set gain with a DMM. That way you can tell approximately what you are sending to your sub. DMM ? Can you explain what that means?
hdrox88 Posted August 16, 2009 Report Posted August 16, 2009 DMM ? Can you explain what that means? Sorry, Digital Multi Meter.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.