qu1cks1lver56 Posted August 27, 2009 Report Posted August 27, 2009 what are the advantages to a tapered t-line vs. a non tapered t-line? and if one was tapered how much do you taper it? First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load.
devsmazduh Posted August 28, 2009 Report Posted August 28, 2009 tapered t-line? doesnt that defeat the purpose. because doesnt the port have to be the same width and whatnot throughout the whole thing. i could be wrong tho... ill cut out yo eyelids and give ya nothin but sleeping pills...
qu1cks1lver56 Posted August 28, 2009 Author Report Posted August 28, 2009 not when done right. theres several variations of a t-line (from what ive gathered in hours of research) First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load.
zfrerichs Posted August 28, 2009 Report Posted August 28, 2009 ask foreverbumpin about chocked tlines i think thats what your talking about Roseville, CA
devsmazduh Posted August 28, 2009 Report Posted August 28, 2009 your probly right. im just under the impression the port has to be consistant throughout. ill cut out yo eyelids and give ya nothin but sleeping pills...
aznboi3644 Posted September 6, 2009 Report Posted September 6, 2009 There is no rule to any t-line...there are just different general guidelines for different applications. There are constant area t-lines and negative and positive tapers. Going from a big throat to small mouth smooths out the output from the mouth. Helps control excursion a little better. Download Hornresp to model different tapers
Recommended Posts
Archived
This topic is now archived and is closed to further replies.