robbie Posted September 4, 2009 Report Posted September 4, 2009 i got a 70 watt audiovox amp hooked up to 2 speakers but when i start my truck it has a noise like the motor playing threw them when the radio is on zero. is it rca jacks or wat? Quote
jhmeg2 Posted September 4, 2009 Report Posted September 4, 2009 check ur rca's, and ground. maybee you even put a screw threw an rca during install. Quote ////Alpine, Eclipse, Load Boss, Pheonix Gold, MB Quart,Digital Desings, Memphis, Stinger, Periphial, MTX, Visualogic
robbie Posted September 4, 2009 Author Report Posted September 4, 2009 check ur rca's, and ground. maybee you even put a screw threw an rca during install. i took them back out to inspeck them and no damage to them, ill check ground and try another set of rcas today Quote
Crump Posted September 4, 2009 Report Posted September 4, 2009 i took them back out to inspeck them and no damage to them, ill check ground and try another set of rcas today I had a problem with that and it was just my battery had a bad ground in my trunk. Do you have a 2nd battery? Run your power with your rcas? Check all your grounds and if you need to move your power wire Quote Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs
robbie Posted September 4, 2009 Author Report Posted September 4, 2009 I had a problem with that and it was just my battery had a bad ground in my trunk. Do you have a 2nd battery? Run your power with your rcas? Check all your grounds and if you need to move your power wire one battery no subs just mids and highs,rcas are ran in the center between 2 seats and power rain on passenger side of truck, going to go check grounds right now Quote
lanman31337 Posted September 4, 2009 Report Posted September 4, 2009 http://www.stevemeadedesigns.com/board/ind...showtopic=51975 Check this thread out, it should have everything covered. Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160
CASZ71 Posted September 4, 2009 Report Posted September 4, 2009 http://www.stevemeadedesigns.com/board/ind...showtopic=51975Check this thread out, it should have everything covered. I had the same problem and this thread helped me out my problem was i needed to ground the rca's.. thats where i would start.. Quote 2000 GMC sierra 1500 ext cab KMC XD Spy series rims Front doors Fosgate punch 6 1/2's stock tweets Rear doors Fosgate power 4x6's Probox 10 and box under rear seat Rockford fosgate R-500 Prime series amp (537 rms) 4 gauge wiring
robbie Posted September 4, 2009 Author Report Posted September 4, 2009 ok that helps but now i gota another problem i pulled up my carpet and the foam stuff do i need to run the rca's between the carpet and the foam padding or between foam padding and on the metal? Quote
CASZ71 Posted September 4, 2009 Report Posted September 4, 2009 I ran mine on the metal Quote 2000 GMC sierra 1500 ext cab KMC XD Spy series rims Front doors Fosgate punch 6 1/2's stock tweets Rear doors Fosgate power 4x6's Probox 10 and box under rear seat Rockford fosgate R-500 Prime series amp (537 rms) 4 gauge wiring
robbie Posted September 4, 2009 Author Report Posted September 4, 2009 I ran mine on the metal ok i guess thats were mine are going. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.