smokeysgirl Posted September 6, 2009 Report Share Posted September 6, 2009 We had extra wood layin around and figured it'd be a great idea to start on the enclosure for my ColoradHO (for u Chode ) The system will consist of RF Power Series Components, 1 4 Channel RF Power Series amp (2009 model), last but not least 1 single 10" FI SSD subwoofer! First we took the measurements (Kaimana's(smokeumtires for all you newbs) been teaching me step-by-step, so im the one with the dirty hands this time) Imma Just post pics...Cause I dont know how to explain this stuff well enough yet DAY 1 Keep in mind... Im not cuttin the wood, Mana is. I dont have the hand 4 routers and saws just yet I just measured everything and cut the cardboard for the curves Then We wrapped it in fleece...and he handed me the stapler and said "MAKE SURE theres no wrinkles!" After bout 30min this is the result Now for some resin.... And after the first day heres how it looks Alohas Amber Link to comment Share on other sites More sharing options...
smokeysgirl Posted September 6, 2009 Author Report Share Posted September 6, 2009 Day 2 Time For More resin this time with fiberglass , My friend came by and gave me a hand too since Mana was takin pics Then I took the center fleece out of the ring. It was too solid to cut. So look wat my boyfriend has me do Then MORE LAYERS, and the Finish of day 2 Alohas Amber Link to comment Share on other sites More sharing options...
smokeysgirl Posted September 6, 2009 Author Report Share Posted September 6, 2009 DAY 3 More Glassing Now SANDING And FINALLY Filler..... Mana took over from this point. Hes better in this "smoothing out" than I am But I can Sand One More Coat and the end of day 3 Alohas Amber Link to comment Share on other sites More sharing options...
Sampsonite Posted September 6, 2009 Report Share Posted September 6, 2009 --Sampson 816-591-6592 www.kcrimshop.com Link to comment Share on other sites More sharing options...
Stephen Posted September 6, 2009 Report Share Posted September 6, 2009 interesting you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
smokeysgirl Posted September 6, 2009 Author Report Share Posted September 6, 2009 Link to comment Share on other sites More sharing options...
yeepimp Posted September 6, 2009 Report Share Posted September 6, 2009 Thats awesome. I wish more girls were into car audio around here. BELOOKY for my build coming back soon! I'm lacking funds, but food stamps pays my bills. Link to comment Share on other sites More sharing options...
EricR Posted September 6, 2009 Report Share Posted September 6, 2009 lookin good ! you have a good teacher i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
smokeysgirl Posted September 6, 2009 Author Report Share Posted September 6, 2009 And After a couple more coats of filler and enough sanding to make Kaimana say FUCK THIS DAY 4Here.... STRONG ENOUGH FOR 1 10"? And Finish Coat Last test fit before the sub goes in Alohas Amber Link to comment Share on other sites More sharing options...
zfrerichs Posted September 6, 2009 Report Share Posted September 6, 2009 looks good Roseville, CA Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.