fi audio Posted September 10, 2009 Report Posted September 10, 2009 Im trying to decide weather or not to go with 1 bl 12 in a ported 2.0 cuft box at 33hz or 2 12" ssd with the bp bower option in a sealed box that would be 1.8cuft .9 cuft for each 12 i would eventually have them in a ported box but they would be in the sealed for the time being until i would get one made for them Im useing the the rockford fosgate power d20001bd i would run the bl at 2 ohms to make 1500 rms. Im mainly lookin for bass Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
tehbert0 Posted September 10, 2009 Report Posted September 10, 2009 why not a btl 12 and give it the full power from the amp http://motorcitydesignsaudio.com
keepinitloud Posted September 10, 2009 Report Posted September 10, 2009 why not a btl 12 and give it the full power from the amp I agree 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1
fi audio Posted September 10, 2009 Author Report Posted September 10, 2009 Sounds good but only one problem would i be able to get away with stock alt and battery until i would get the money to add a 200 amp alt and battery. Just run the big 3 for now? Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
tristan560 Posted September 10, 2009 Report Posted September 10, 2009 No...the t2000 will not like your stock electrical...at least add a batt or two. Oh and do you have the birthsheet for the amp? My t2000 put out 2200 at 2ohms. And the bl is not gonna like that. <u>99 Jimmy SLT 4WD</u> Systemless. <u>99 Grand Prix GTP</u> DC XL 12 on 1.5k tuned lowwwwww.
fi audio Posted September 10, 2009 Author Report Posted September 10, 2009 No...the t2000 will not like your stock electrical...at least add a batt or two. Oh and do you have the birthsheet for the amp? My t2000 put out 2200 at 2ohms. And the bl is not gonna like that. I havent bout the amp yet but goin to order it after i figure out what setup im goin with. on the website im buyin it from i see now that it says 2200 watts at 2 ohms. so what batterys would you reccomend Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
Recommended Posts
Archived
This topic is now archived and is closed to further replies.