uluahunta808 Posted September 19, 2009 Report Share Posted September 19, 2009 there is a post in the subwoofer section that tells you which would be louder. two 12's = about 22" of cone area one 15" = about 13" of cone area fyi the more cone area means louder! Quote Link to comment Share on other sites More sharing options...
fritosaregood Posted September 19, 2009 Report Share Posted September 19, 2009 there is a post in the subwoofer section that tells you which would be louder. two 12's = about 22" of cone area one 15" = about 13" of cone area fyi the more cone area means louder! did you just make up those numbers? area is a inches squared too even a 15 is about 121"^2 and 2 12's is more and more is louder. if you basing it on the same exact sub. Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
uluahunta808 Posted September 19, 2009 Report Share Posted September 19, 2009 did you just make up those numbers? area is a inches squared too even a 15 is about 121"^2 and 2 12's is more and more is louder. if you basing it on the same exact sub. i wasn't sure but look in the subwoofer section there is something bout the cone area of subs and which is louder.i thought it was someting similar but whatever here ill post a link Quote Link to comment Share on other sites More sharing options...
skittlesRgood Posted September 19, 2009 Report Share Posted September 19, 2009 (edited) there is a post in the subwoofer section that tells you which would be louder. two 12's = about 22" of cone area one 15" = about 13" of cone area fyi the more cone area means louder! lol that would be the diameter of the cone. not the area. lets not post advice that we dont even know kids a 15" sould be closer to 153"^2 and one 12" is like 113"^2 Edited September 19, 2009 by skittlesRgood Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
uluahunta808 Posted September 19, 2009 Report Share Posted September 19, 2009 lol that would be the diameter of the cone. not the area. lets not post advice that we dont even know kids here bitch. i never knew what it was called it just had something to do with the cones and areas of a sub.this little chart is a big help. http://www.stevemeadedesigns.com/board/ind...?showtopic=6819 Quote Link to comment Share on other sites More sharing options...
Team_DC-Derrick Posted September 19, 2009 Report Share Posted September 19, 2009 here bitch. i never knew what it was called it just had something to do with the cones and areas of a sub. this little chart is a big help. http://www.stevemeadedesigns.com/board/ind...?showtopic=6819 So showing that link still proves your answer was off on the #s... back on topic... 2 lvl4 12s will be fine with almost 2k rms, their rms is 1k a piece... and if he wanted to upgrade later he would have the room 2... or you could do 1XL 15 on the 1500d and then upgrade later to another 1500d and another XL.. Either way, pics please Quote The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones Link to comment Share on other sites More sharing options...
skittlesRgood Posted September 19, 2009 Report Share Posted September 19, 2009 here bitch. i never knew what it was called it just had something to do with the cones and areas of a sub. this little chart is a big help. http://www.stevemeadedesigns.com/board/ind...?showtopic=6819 the link shows nothing of your 22" measurement. you dont need a link anyways. you just need to know math. dont call me a bitch, retard. Quote If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
uluahunta808 Posted September 19, 2009 Report Share Posted September 19, 2009 (edited) the link shows nothing of your 22" measurement. you dont need a link anyways. you just need to know math. dont call me a bitch, retard.ha who the fuck cares you get the point. Edited September 21, 2009 by Eric B No need for the N word Quote Link to comment Share on other sites More sharing options...
pighunta808 Posted September 19, 2009 Report Share Posted September 19, 2009 ha who the fuck cares you get the point. Niggah!damn bra you need to calm down. and good find on the link thats some cool info. haha as long as we know which is louder it dont matter Quote pioneer premier sub kenwood 800RMS amp o;d ass pioneer deck 10g wire need to up grade VW Passat Link to comment Share on other sites More sharing options...
resident_virus Posted September 20, 2009 Author Report Share Posted September 20, 2009 So the 2 LVL3 12's are louder than a single LVL4XL 15 on a SAZ1500D because of cone area? What about other factors? Dispacement Motor force Xmax also AFIK more coils to vaporized heat are better... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.