BulletInjection Posted September 16, 2009 Report Posted September 16, 2009 I saw these and they are very cheap and do 100rms so I thought I might get them and put them in my rear doors. Just wanting to know if anyone had any thoughts on them http://www.dealercostcaraudio.com/kp-60c.aspx Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
white4d96 Posted September 16, 2009 Report Posted September 16, 2009 I say don't do it. Quote Too many projects, too little time...
BulletInjection Posted September 16, 2009 Author Report Posted September 16, 2009 I say don't do it. What makes you say that Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
justinlc3 Posted September 16, 2009 Report Posted September 16, 2009 I wouldn't buy those. Quote 2000 VW Jetta Pioneer headunit 1 Soundstream PC.6 6.5" component set 4 Pioneer TSA6984R 6x9 4 Selenium 6w4p 6" 2 15" Sundown Audio E's in 4 cubes @35hz Digital Designs CM1000 Rockford Fosgate Punch p400.4 Plans New Box New headunit New Amps R.I.P.1995 Chevy Blazer LS Rockford Fosgate headunit 2 Rockford Fosgate T1 6.5" 2 Rockford Fosgate T1 4x6 2 Rockford Fosgate T1 4" Hifonics Warrior hcx5.2c 4 Selenium 6w4p 6" 18" Mmats Juggernaut in 4.5 cubes @ 27hz Hifonics Brutus 1200 Rockford Fosgate Punch p400.4 Alpine 4 channel Optima Red Top Plans New Box New headunit New Amps
white4d96 Posted September 16, 2009 Report Posted September 16, 2009 Two things mainly. For one, just guesstimating by the size of the magnet, those probably won't take 100rms. Unless they're neo magnets, in which case they wouldn't cost $40. Also, "Natural Woofer Slope for Phase Correct Output" sounds to me like "No crossover slope for the woofers." Which is not desirable. Quote Too many projects, too little time...
BulletInjection Posted September 16, 2009 Author Report Posted September 16, 2009 I wouldn't buy those. Why not, only $40 but seem ok. 100rms, cross overs, tweeters(although silk), and only 2 3/4" mounting depth Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
BulletInjection Posted September 16, 2009 Author Report Posted September 16, 2009 Two things mainly. For one, just guesstimating by the size of the magnet, those probably won't take 100rms. Unless they're neo magnets, in which case they wouldn't cost $40.Also, "Natural Woofer Slope for Phase Correct Output" sounds to me like "No crossover slope for the woofers." Which is not desirable. hmmm I see, also these would be replacing the crappy speakers used to replace my blown ones... laugh all you guys want I got them for like $5 for the pair and they were just to fill in the back http://www.dealercostcaraudio.com/f265.aspx Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
AI James Posted September 16, 2009 Report Posted September 16, 2009 just get some pheonix gold rsd coaxials Quote
BulletInjection Posted September 16, 2009 Author Report Posted September 16, 2009 just get some pheonix gold rsd coaxials Actually I just found these(could not before) and this is about the cheapest price I have seen on them http://www.dealercostcaraudio.com/rockford...powert152s.aspx They so sexy and been looking for a good price for a while. Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection
white4d96 Posted September 17, 2009 Report Posted September 17, 2009 Actually I just found these(could not before) and this is about the cheapest price I have seen on themhttp://www.dealercostcaraudio.com/rockford...powert152s.aspx They so sexy and been looking for a good price for a while. Now yer' talkin lol Quote Too many projects, too little time...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.