robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 at the end of every kopper tube i'm going to fasten some speakercable.
NDMstang65 Posted October 4, 2009 Report Posted October 4, 2009 Fantastic craftsmanship!!! It is rare to see somebody who takes such pride in their work Cheers! Authorized Ascendant Audio Dealer! Message me for information. If you can't explain it simply, you don't understand it well enough -Albert Einstein "I have a plausible excuse for not liking you. And you know why."
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 The aluminium part which will become the frontcover of the crossovertay has been chromed . The aluminium parts which need to guide the kopper and the piece inbetween the carbon will also get chromed. This will make it easier for me to keep everything clean in the future.
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 These alumium plates are made to be mounted on the side of the crossovertray. The previous ones have been removed because they didn't completely fit the rest of the design. De aluminium parts on the side of the crossovertray have been replaced so the they have the same look. Attention to detail... I've used the old router. Afterwards it all got polished.
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 This is the complete set up, you can see that everything worked out pretty good. It's not easy perfectly line up the 16 tubes, and the fact that the connectionpoints on the cross-over aren't even in a straight angle doens't make it easier. The kopper connectors have been sanded and clearcoated
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 The aluminium parts which need to guide the kopper and the piece inbetween the carbon will also get chromed. This will make it easier for me to keep everything clean in the future.
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 he you can see everything mounted in the car this is the frontpiece of the crossovertray. picture of everything opened. but i won't let ik open this much. First i'll mount everything so that i can see what i'm going to do with it
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 the carbonworks... This is the kevlar piece which will be mounted behind the aluminium on the side of the tray
robola 46 Posted October 4, 2009 Author Report Posted October 4, 2009 I've modified the part used to hold the motor in to place. I've made everything stronger here you can see how everything works
Recommended Posts
Archived
This topic is now archived and is closed to further replies.