CarAudioFab Posted October 3, 2009 Report Share Posted October 3, 2009 So guys my Taurus has went through many a system but is time to let loose and get it to the point I have always wanted. Crisp clean highs and solid bottom end, by no means "sq" perfect but close as I can still being loud. Plans include: AQ2200D Amplifier Fi BTL 15" Loaded D2 2 Batteries Upgraded Alt 1/0 Gauge Runs and Big 3 (Complete) Fully Deadened Front doors (Complete) Trunk Deadened 4 Cubic Foot Box at 34 Hz with Kerfs (In progress) Pioneer Door Speakers and 12 Gauge Ran through molexes (Complete) Amped Front Speakers off Profile AP400 (Complete) Some pics of the big 3 Started the box: Here is a sketchup model of it, the front will be double baffled, hence the offset you will see inthe build pics, so far there is only the back section Practice kerfing THis is the inner port section Port painted Thats it for now, I love input, let me know what you guys think, I learned a lot about kerfing, so any questions ask... Quote -Mark Host of "CarAudioFabrication" - YouTube Car Audio Tutorial Channel Check out my forum section here on SMD for my builds and tutorial videos! Subscribe on YouTube: http://www.youtube.com/CarAudioFabrication Link to comment Share on other sites More sharing options...
bass_addict07 Posted October 3, 2009 Report Share Posted October 3, 2009 dude this is crazy because this is the exact same setup i wanna run i already gotthe 2200 d i juss need the btl, wiring, alt, and batts lol Quote 97 exploder xlt2 18" obsidian audio daul 2 v2s1 sundown audio saz1500d at .5 ohm2 sets of alpine type r components1 MB quart onyx 125.4alpine cda-98871 mike singer 250 amp altxs d3400 in the backall kicker wiringBIG 3singer resonance killer sound deadner throughout Link to comment Share on other sites More sharing options...
Decaf Posted October 3, 2009 Report Share Posted October 3, 2009 very nice, continue Quote Link to comment Share on other sites More sharing options...
CarAudioFab Posted October 3, 2009 Author Report Share Posted October 3, 2009 Thanks guys, I already got a pm with questions about the kerf here is a quick response, on my next one I will take more pics "In a basic explanation you run a circular saw in parallel lines that nearly cut all the way through the mdf but leave about 1/16-1/8 an inch. To get a 3 inch radius I did 11 cuts at 1/2 inch intervals,for 6 inch just do 11 at 1 inch. When you go to bend the wood you slowly work it back and forth in order to avoid it snapping. Then clamp it in place (you dont have to do 90 degree angles) and fiberglass it together, it went pretty smoothly, just make sure your lines are real straight, a table saw with fence would be optimum but I got away with just using a jig I made with my circular saw" Quote -Mark Host of "CarAudioFabrication" - YouTube Car Audio Tutorial Channel Check out my forum section here on SMD for my builds and tutorial videos! Subscribe on YouTube: http://www.youtube.com/CarAudioFabrication Link to comment Share on other sites More sharing options...
CarAudioFab Posted February 6, 2010 Author Report Share Posted February 6, 2010 Been out of the game for a little while but here is the box, no BTL yet, just using a 15" 7500 til I save up enough... Yes I need to paint the port... Quote -Mark Host of "CarAudioFabrication" - YouTube Car Audio Tutorial Channel Check out my forum section here on SMD for my builds and tutorial videos! Subscribe on YouTube: http://www.youtube.com/CarAudioFabrication Link to comment Share on other sites More sharing options...
ineeDBass419 Posted February 6, 2010 Report Share Posted February 6, 2010 nice box..that bish is a beast Quote xbox 360 gamertag-greenrocks420 Not insulting you or anything, but did you just call us "bloody winging fairies" ? Link to comment Share on other sites More sharing options...
tehbert0 Posted February 6, 2010 Report Share Posted February 6, 2010 box is sexy Quote http://motorcitydesignsaudio.com Link to comment Share on other sites More sharing options...
rmzsuzuki89 Posted February 6, 2010 Report Share Posted February 6, 2010 Love the port. Quote My Feedback Thread http://www.stevemeadedesigns.com/board/topic/103868-official-rmzsuzuki89-feedback-thread/page__pid__1441542#entry1441542 Link to comment Share on other sites More sharing options...
CarAudioFab Posted February 6, 2010 Author Report Share Posted February 6, 2010 nice box..that bish is a beast Haha yeah thanks, pain in the ass to get in and out box is sexy haha thanks Love the port. Thanks, Kerf worked out well Quote -Mark Host of "CarAudioFabrication" - YouTube Car Audio Tutorial Channel Check out my forum section here on SMD for my builds and tutorial videos! Subscribe on YouTube: http://www.youtube.com/CarAudioFabrication Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.