Jump to content

Recommended Posts

The box has been carpeted and it is sexy (in a french accent)

Also soldered some 8 gauge speaker wire

From this

100_0378.jpg

To This

100_0383.jpg

100_0385.jpg

Amp Mount Board for the Sundown 2k

100_0384.jpg

Some solderin good stuff

100_0387.jpg

I used meades lil how to and capped them off with solder after thewire pulled a ton of solder in.

This shit aint coming off.

I am about to start deadening the trunk with some d lite.

Mas Comments por favor

Link to comment
Share on other sites

Just used about 10 sheets of damplifier lite on the bottem of the trunk and we will be using much more. Forgot to take pics, but Friday we will do as much as we can ( deadening, big 3, new bat up front, run power wire, and figure out how to take the back seats off. we measured and the box will slide in through the back seats by 2" So even though no one is leaving comments, Ill update this made sure all of the deadener was solid.

Link to comment
Share on other sites

a heads up for everyone: The craftsmanship of this box is a perfect 10 out of 10 in my honest opinion, out of all the boxes Crump builds, each one seems to get better and better, i cannot wait to see what the next one is gonna look like!! :clapping:

*oh yea, this box was built outside in the cold, no workspace, no garage, or shop, oh yea, only 17 years old, so its even more impressive when u think about it :)

Black 1998 Nissan Maxima
1st Setup: 145.8 DB Outlaw @37 HZ On Music Out Of Trunk
2nd Setup: 147.8 DB @42 HZ On Music Out The Trunk
Current Trunk Build:
153.8 DB Outlaw @ 49 HZ Out the trunk (150.8 DB Sealed)
Team gg.

Link to comment
Share on other sites

By the way, the amp has been sitting in my room since july, I might as well post pics of it on this thread

DSC00949.jpg

DSC00955.jpg

DSC00959.jpg

DSC00958.jpg

DSC00960.jpg

Black 1998 Nissan Maxima
1st Setup: 145.8 DB Outlaw @37 HZ On Music Out Of Trunk
2nd Setup: 147.8 DB @42 HZ On Music Out The Trunk
Current Trunk Build:
153.8 DB Outlaw @ 49 HZ Out the trunk (150.8 DB Sealed)
Team gg.

Link to comment
Share on other sites

Box looks great !!! Don't worry about the backseat, its not that hard. Just don't forget about the bolts in the ski hole, that took me a few minutes to remember hehehe.

Take the bottom out first with the two clips under the front of the seat, then you will see the bolts under the seat back. After you take those out, and the ski hole bolts out, you have to lift up to get the 3 upper latches to disengage.

Good luck!!

97 Maxima SE

Bunch of shit going in, check out the build

alpine_logo.jpgSundown_Banner.jpgxspower.png

Link to comment
Share on other sites

thats a damn good setup right there, im 18, and that looks damn good to me lol hopefully my t line comes out looking like that

1997 Pontiac Bonneville Black on Black on Black

15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz

7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link

Blue Custom Trim

Blue Custom Fiberglass Rear Speaker Pods

Autotek Mean Machine MM2000.1

1/0 Knukonceptz KLMX

Rockford Fosgate Twisted RCA's

2 Audiopipe Anl fuse holders w/ 200A Kicker fuses

2nd battery (Soon to be an Odyssey D3100)

Dynamat Extreme Bulk Pack

Custom False Floor

15% Tint All Around

Custom Painted Stock Rims

My Build Log

Tailights

15" Lvl 5 DC T-Line Build

Link to comment
Share on other sites

Grats.

After Friday look forward to nothing for another two weeks.

Box looks good.

Good job Matt, try to show up to school tomorrow.

rofl, dont be so negative alex!! i mean yea i hope thats not gonna happen, i just hope my bumper gets fixed this week, so this shit is done before thxgiving, cuz this is all i have been thinking about since february

Black 1998 Nissan Maxima
1st Setup: 145.8 DB Outlaw @37 HZ On Music Out Of Trunk
2nd Setup: 147.8 DB @42 HZ On Music Out The Trunk
Current Trunk Build:
153.8 DB Outlaw @ 49 HZ Out the trunk (150.8 DB Sealed)
Team gg.

Link to comment
Share on other sites

Box looks great !!! Don't worry about the backseat, its not that hard. Just don't forget about the bolts in the ski hole, that took me a few minutes to remember hehehe.

Take the bottom out first with the two clips under the front of the seat, then you will see the bolts under the seat back. After you take those out, and the ski hole bolts out, you have to lift up to get the 3 upper latches to disengage.

Good luck!!

I measured the ski hole opening when i took off the trim and it looks like I get about 22" the box is 20" so hopefully it just slides right through if not, we may be looking at a sawzall :D

Link to comment
Share on other sites

rofl, dont be so negative alex!! i mean yea i hope thats not gonna happen, i just hope my bumper gets fixed this week, so this shit is done before thxgiving, cuz this is all i have been thinking about since february

Well, the bumber isn't going to be completely fixed for awhile.

Even if you do it yourself it's still going to take awhile to get it and then the installation will be difficult.

It will NOT be done by Thanksgiving, have fun building in the snow.

4 18's, low power and lots of gay fur.

Team gg

Team DOA

My Videos :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 842 Guests (See full list)

×
×
  • Create New...