Jump to content

Recommended Posts

Its time to finally install all the goodies I have purchased before I got laid off.

Alpine IVA-W505 Headunit

Alpine PXA-H701 Processor

Alpine RUX-C701 Controller for PXA-H701

3x Sundown SAX-100.4D for Highs, Mids and Midbass

1x Sundown SAZ-3000D

4x SEAS Prestige 27TFFNC/G (H1396) 1" Textile Dome Tweeters

4x Tang Band W6-1721 6-1/2" Underhung Midbass Drivers (Midrange)

4x Sundown E8 Woofers for Midbass

2x Sundown Custom 15D1 Nightshades with Copper Coils

DC Power Inc 250amp alternator w/Switchable MLA Module - already installed.

I started with the power backbone. I installed a DC Power 250amp alternator and switchable MLA module.

Posted Image

Posted Image

Kinetik HC1800 Under the hood, Big 3 with Knukonceptz Kolossus Fleks Kable 1/0. After this pic was taken, I cleaned it up a little more by removing that little piece of grey 1/0 and connecting the stock ground wire to chassis where the battery is grounded. It looks nicer now.

Posted Image

Positive wire from the alternator going to battery positive (blue wire)

Posted Image

The substage will be 2 custom Nightshade 15's. These are the copper coil Nightshades Jacob was testing with. Subs will be firing foward through the rear seat, ports will be up through the deck and I will seal off the trunk.

The old torsion bars must go as they will be in the way. I installed a pair of StrongArm 4518 Universal 14.50" Ext. 100# Lift Supports.

Posted Image

Posted Image

Posted Image

Posted Image

Making room for the box with my new toy.

Posted Image

The upper corners and a little off the top is what I'm removing.

Posted Image

The reciprocating saw goes through this like butter.

Posted Image

Taking a break.

Posted Image

Now thats better.

Posted Image

97 Maxima SE

Bunch of shit going in, check out the build


Link to comment
Share on other sites

  • Replies 268
  • Created
  • Last Reply

Look awesome keep it up! B)

2 Infinity Reference 1252w 12s

4.2 cubic foot box tuned to 28hz

Sub amp: 1 Profile AP1200

Speaker amp: 1 Sony Xplod XM-504z

Kenwood eXcelon KDC-X492

4 and 8 Gauge Knu

Big III In 1/0

All in my 90 Accord


Diamonds are forever, but 9's end that shit fast....

Link to comment
Share on other sites

I'm tunned in...

2007 Chevy Impala LS

1 Crescendo 3KWP

1Crescendo C1000/4

2 DC lvl 4 15's with lvl5 dual .7 coils

1Audio Control Matrix

1 Pioneer P880PRS

1 300 amp Iraggi alt

All power runs done with Knu flex 0/1 guage

1 optima yellow top under the hood

1 XS 5100 and two Deka's in the trunk

4 Crescendo MP-8 mid bass drivers

2 DB Drive p5 5 D Pro Audio tweeters

Link to comment
Share on other sites

tuned in :clapping:

1993 Mazda Mx-3

Subs: 2 18" DC Audio Lvl 4 D.7

Highs amp: Sundown SAX-100.4

Sub amp: Sundown SAZ-3000D

Electrical:Kinetik 1200 under hood, 2-Kinetik 2400 rear

All 1/0 KnuKonceptz Wire Power/Ground, Big 3, 8Ga Speaker Wire, KnuKonceptz Karma RCA's

Dampening: 120sqft 80Mil Thick Sound Destroyer Mat

Goal: 150 DB 149.9 Street Bass



Link to comment
Share on other sites

I know exactly what you mean, my knuckles still hurt !!! WTF were they thinking?

i know when i first started i was like where the f#$k do start at. its not like a GM truck where its on top. i also cut up my arm.

but this build looks so good.

what maxima do you got?

i got the GXE


Club 150 (15x.x)


Future Build:

1x 15" T3 TSNS

2x Sundown Audio SAZ3000d Parellel strapped

Link to comment
Share on other sites

i know when i first started i was like where the f#$k do start at. its not like a GM truck where its on top. i also cut up my arm.

but this build looks so good.

what maxima do you got?

i got the GXE

maximas are easy compared to ingtera's ;)

how did you guys take yours off?

i jacked the car up

remove the front passenger tire

remove the radiator fans

disconnect the negative on battery

dropped the A/C

loose the belt

drop the alternator



"GET LOUD OR DIE TRYIN"only the loudest will survive.

Link to comment
Share on other sites

Nice start.

keep it comin.

COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 212 Guests (See full list)

    • There are no registered users currently online

  • Create New...