Subs wired to 1 ohm?

[Ndnkobra]

Hey guys, i've had my subs wired up from a pal and i haven't really question his wiring till now after seeing a diagram on how to wire up 2 dual1 subs. I have 2 Q's, and i was wondering if you guys could help me out on seeing if the wiring is correct, the subs sound fine and there doesnt seem to be a problem but i wanted to make sure. I may have to clarify on what the wiring looked like, but here's my flimsy diagram.

[/url]

And heres the one from the12volt

[/url]

Now like i said before, i may have to re-look at the wiring for accuracy, but i KNOW for certain that only 1 set of terminals are wired for each of my subs, the other set doesnt have any wires going to them. So, is this a problem, are they wired to 1 ohm, or should i look to re-wire them? thanks for any help!

The amp is a ED Nine.1

[splzx3]

worng place 2 ask

and the frist way is so worng and u should rewire then like the way off 12 volt like soon

[CaptainzPlanetz]

worng place 2 ask

and the frist way is so worng and u should rewire then like the way off 12 volt like soon

x2, just put a jumper wire to connect the other set of positive and negative terminals on each sub, then you will be good.

[Loudcav]

he has you essencially wired up to 1/2 ohm so instead of 4 coild handeling the power you have only 2 taking it