chevscalade209 Posted November 9, 2009 Report Share Posted November 9, 2009 so ima do 12000k high beams 10000k low beam & 4000k foggers so do i need ballests for each bulb or.... Quote 2 jl audio 12w3's sealed soon to be 4 level 3 15's blow through all dc audio Link to comment Share on other sites More sharing options...
Bigg Boy Posted November 9, 2009 Report Share Posted November 9, 2009 Yes you need 3 kits for that you want to do Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
Carnag3 Posted November 9, 2009 Report Share Posted November 9, 2009 Each bulb runs off of one ballast. Don't forget, the higher the Kelvin rating, the LOWER the output. Most car manufacturers use 4300k as it is the brightest on the spectrum. I run a 4300k setup in my civic and they are ridiculously bright. Quote 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!! Link to comment Share on other sites More sharing options...
Thewes Posted November 9, 2009 Report Share Posted November 9, 2009 so ima do 12000k high beams10000k low beam & 4000k foggers so do i need ballests for each bulb or.... If you get bixenon bulbs with built in high/low beam in one bulb, then you will only need 2 ballasts for your highs and lows. (Also depends on your vehicle) Other than that each bulb requires a ballast. And please don't get 12000 kelvin. Quote Link to comment Share on other sites More sharing options...
Bigg Boy Posted November 9, 2009 Report Share Posted November 9, 2009 I agree I think any thing over 8k-10k is too much I recommend 6k to people when I install them Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
chevscalade209 Posted November 9, 2009 Author Report Share Posted November 9, 2009 If you get bixenon bulbs with built in high/low beam in one bulb, then you will only need 2 ballasts for your highs and lows. (Also depends on your vehicle) Other than that each bulb requires a ballast. And please don't get 12000 kelvin. why wouldnt i get 12000k Quote 2 jl audio 12w3's sealed soon to be 4 level 3 15's blow through all dc audio Link to comment Share on other sites More sharing options...
Bigg Boy Posted November 9, 2009 Report Share Posted November 9, 2009 (edited) 1. problems with cops 2. they decrease the light output 3. it turns the road blue/purple 4. they are very distracting to other drivers You shouldn't really add hid to non projector headlights, but you can put them in your stock, but your not going to have a clean cut off line Edited November 9, 2009 by Bigg Boy Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
Carnag3 Posted November 9, 2009 Report Share Posted November 9, 2009 ^Exactly. Quote 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!! Link to comment Share on other sites More sharing options...
Bigg Boy Posted November 9, 2009 Report Share Posted November 9, 2009 And this is not coming from someone who has installed a couple kits, I have personally installed over a hundred in the last year. Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
chevscalade209 Posted November 9, 2009 Author Report Share Posted November 9, 2009 And this is not coming from someone who has installed a couple kits, I have personally installed over a hundred in the last year. ok well i have my silverado n i want to get h.i.d low n high beam also yellow h.i.d foggers for sure whut do you think i should get Quote 2 jl audio 12w3's sealed soon to be 4 level 3 15's blow through all dc audio Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.