babyjoker Posted May 7, 2007 Report Posted May 7, 2007 ok so my sis was complaning that her subs kept turning off, so i took a look and in one of the subs (2 12''s) u can hear what sounds like the voicecoil is loose or something, but still works up until i turned it up, then the amp goes into protection. I have heard this noice before on a DVC sub when only one of them is connected but these are SVC. u guys have any clue at what it could be? Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
Chris Posted May 7, 2007 Report Posted May 7, 2007 How old & what brand subs & specs please. Also specs on the amp being used. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
babyjoker Posted May 7, 2007 Author Report Posted May 7, 2007 Arc audio KarS124 Single voice coil 4 ohm 250 watts rms / 400 peak Impedance : 4 ohm Resonant frequency : 23.6Hz Sensitivity : 87 db RMS power handling : 250 watts/ 400 peak Electrical "Q" : .764 Mechanical "Q" : 6.173 Total "Q" : .680 Equivalent volume: 117.64L One way linear: 8 mm Mounting depth : 6.5" Optimum sealed enclosure : 1 cuft Ported enclosure : 1 cuft little over a year old amp- Kicker Kx400.1 200 rms at 4 ohms 400 rms at 2 ohms 2-3 years old Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
Chris Posted May 7, 2007 Report Posted May 7, 2007 (edited) Sub Is Blown. x2. Whats probably occurring is that the glue holding the VC together is loosening up & probably a couple strands have come unattached. Now when the sub moves just enough, they rub on the basket underneath the spider & cause a short in the one woofer. This causes an overall resistance drop in the load on the amp, therefore sending it into protect mode. New subs are needed. Edited May 7, 2007 by Chris Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
babyjoker Posted May 7, 2007 Author Report Posted May 7, 2007 take a dmm to the sub. dont have one Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
babyjoker Posted May 7, 2007 Author Report Posted May 7, 2007 x2.Whats probably occurring is that the glue holding the VC together is loosening up & probably a couple strands have come unattached. Now when the sub moves just enough, they rub on the basket underneath the spider & cause a short in the one woofer. This causes an overall resistance drop in the load on the amp, therefore sending it into protect mode. New subs are needed. that sucks Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
babyjoker Posted May 7, 2007 Author Report Posted May 7, 2007 u guys have any suggestion on subs to replace these? Quote 1999 Eclipse N/T 12'' Fi BTL Gp3000d PM D3100
Chris Posted May 7, 2007 Report Posted May 7, 2007 What's your budget? Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.